Dry Hard Turning versus Grinding—The Influence of Machining-Induced Surface Integrity on Fatigue Performance
Coatings · 22.04.2023 · 13 (5) · 809
DOI: 10.3390/coatings13050809 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 22.04.2023. Verfasst von Yinxia Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Dry hard turning (DHT) provides an effective process for finishing high-hardness materials. Machining-induced surface integrity has a direct impact on functional performance. This study compares the effects of the DHT and grinding processes on machining-induced surface integrity and fatigue performance of 18CrNiMo7-6 steel. The DHT and grinding experiment were carried out by using a polycrystalline cubic boron nitride tool and corundum wheel, respectively. The 3D surface morphology, surface roughness, surface residual stress, and machining accuracy of the hourglass-shaped specimen were measured. The fatigue fracture was characterized by scanning electron microscopy. The experimental results show that compared to grinding, DHT has obtained a larger surface compressive residual stress (the maximum axial and tangent residual stresses are −762.6 MPa and −442.8 MPa, respectively) and a lower surface roughness (the minimum Ra and Rq are 0.172 μm and 0.230 μm, respectively). This study is an attempt to use DHT instead of a grinding process to finish 18CrNiMo7-6 steel, providing a reference for high-quality and sustainable manufacturing of hardened steel.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhang, Y., Yuan, S., Yang, X., Gao, W., Zhang, M., & Peng, Z. (2023). Dry Hard Turning versus Grinding—The Influence of Machining-Induced Surface Integrity on Fatigue Performance. Coatings, 13(5), 809. https://doi.org/10.3390/coatings13050809
Vancouver
Zhang Y, Yuan S, Yang X, Gao W, Zhang M, Peng Z. Dry Hard Turning versus Grinding—The Influence of Machining-Induced Surface Integrity on Fatigue Performance. Coatings. 2023;13(5):809. doi:10.3390/coatings13050809
BibTeX
@article{Zhang2023,
author = {Zhang, Yinxia and Yuan, Shaoshuai and Yang, Xin and Gao, Wei and Zhang, Mingliang and Peng, Zhenlong},
title = {Dry Hard Turning versus Grinding—The Influence of Machining-Induced Surface Integrity on Fatigue Performance},
journal = {Coatings},
year = {2023},
volume = {13},
number = {5},
pages = {809},
doi = {10.3390/coatings13050809}
}
EUVIMED