EUVIMEDDescubrir EUVIMED
Crossref

TRIBOLOGICAL PERFORMANCE OF HEAT-TREATED Al6061 HYBRID METAL-MATRIX COMPOSITES

Pradeep A D, Kannakumar K, Vignesh Kumar S, Manojkumar S, Tamilarasan V D

Materiali in tehnologije · 2026-06-08 · 60 (3)

DOI: 10.17222/mit.2026.1663 ↗

At a glance

Journal article in Materiali in tehnologije, published online on 2026-06-08. Written by Pradeep A D and 4 co-authors.

ResumenDatos bibliográficosCiteRelated studies

Abstract (original language)

We investigate the tribological performance of a heat-treated Al6061 alloy and its hybrid composites under dry-sliding conditions. Hybrid aluminium metal-matrix composites reinforced with graphite, nano-tungsten carbide and red mud were fabricated using the stir-casting technique. The as-cast alloy and composites were subjected to a T6 age-hardening treatment to examine the effect of microstructural modification on the wear behaviour. Dry-sliding wear tests were carried out using a pin-on-disc tribometer under varying loads, sliding velocities and sliding distances based on a Taguchi L9 design. The specific wear rate and coefficient of friction were measured, and worn surfaces were analysed using FESEM and EDS. The results show that hybrid composites exhibit superior wear resistance compared to the base alloy after heat treatment. Tungsten carbide improved the hardness and load-bearing capacity, reducing material removal, while graphite contributed to the friction reduction through tribo-layer formation. The combined addition of tungsten carbide and graphite resulted in the lowest wear rate and stable friction behaviour. Red mud enhanced the wear resistance under moderate conditions by promoting oxide-layer formation but caused brittleness under severe sliding. Heat treatment further improved the performance by refining the microstructure and strengthening matrix–reinforcement bonding. Overall, hybrid reinforcement combined with heat treatment enhances the tribological performance.

Cite

APA

D, P. A., K, K., S, V. K., S, M., & D, T. V. (2026). TRIBOLOGICAL PERFORMANCE OF HEAT-TREATED Al6061 HYBRID METAL-MATRIX COMPOSITES. Materiali in tehnologije, 60(3). https://doi.org/10.17222/mit.2026.1663

Vancouver

D PA, K K, S VK, S M, D TV. TRIBOLOGICAL PERFORMANCE OF HEAT-TREATED Al6061 HYBRID METAL-MATRIX COMPOSITES. Materiali in tehnologije. 2026;60(3). doi:10.17222/mit.2026.1663

BibTeX
@article{D2026,
  author = {D, Pradeep A and K, Kannakumar and S, Vignesh Kumar and S, Manojkumar and D, Tamilarasan V},
  title = {TRIBOLOGICAL PERFORMANCE OF HEAT-TREATED Al6061 HYBRID METAL-MATRIX COMPOSITES},
  journal = {Materiali in tehnologije},
  year = {2026},
  volume = {60},
  number = {3},
  doi = {10.17222/mit.2026.1663}
}
Start for free →