EUVIMEDEUVIMED entdecken
Crossref

MICROSTRUCTURAL EVOLUTION AND HARDNESS OF FERRITIC SUPERALLOYS CONTAINING NiAl-B2 AND L21–Ni2TiAl PRECIPITATES

Adi Ganda Putra, Selly Septianissa, Pawawoi, Manty Aldilani Ikaningsih, Martoni, Martijanti, Mohammad Zaki Mubarok, Hafizh Ridwanulloh, Jodi Irawan, Ba’adilla Akhista Gamara

Materiali in tehnologije · 09.04.2026 · 60 (2)

DOI: 10.17222/mit.2025.1575 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materiali in tehnologije, online erschienen am 09.04.2026. Verfasst von Adi Ganda Putra und 9 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effect of homogenization and aging treatments on the microstructure and hardness of ferritic superalloys containing NiAl-B2 and L21–Ni2TiAl precipitates. Two alloy compositions were prepared using an electric arc furnace, with Ti additions of 2 w/% (Alloy I) and 4 w/% (Alloy II). The ingots were homogenized at 1150 °C for 10 h followed by furnace cooling, and subsequently aged at 800 °C for 8 h. Characterization was conducted using scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and Vickers hardness testing. The as-cast alloys exhibited the highest hardness, averaging 650.8 HV for Alloy I and 625.6 HV for Alloy II, due to the presence of metastable precipitates formed during rapid solidification. Homogenization reduced the hardness to 487.2 HV (Alloy I) and 522.6 HV (Alloy II) as a result of precipitate dissolution and redistribution of the alloying elements, while aging increased the hardness to approximately 525 HV in both alloys through secondary precipitation of the NiAl-B2 and L21–Ni2TiAl with finer and more homogeneous distributions. SEM-EDS confirmed that Alloy I exhibited a more uniform dispersion of precipitates, whereas Alloy II contained a greater quantity of Ni2TiAl, but with local agglomerations. In conclusion, homogenization and aging treatments strongly influenced the precipitation behavior and hardness of ferritic superalloys, with Alloy I showing superior homogeneity and Alloy II favoring greater Ni2TiAl formation, highlighting the effect of Ti content on phase stability and mechanical performance.

Zitieren

APA

Putra, A. G., Septianissa, S., Pawawoi, Ikaningsih, M. A., Martoni, Martijanti, Mubarok, M. Z., Ridwanulloh, H., Irawan, J., & Gamara, B. A. (2026). MICROSTRUCTURAL EVOLUTION AND HARDNESS OF FERRITIC SUPERALLOYS CONTAINING NiAl-B2 AND L21–Ni2TiAl PRECIPITATES. Materiali in tehnologije, 60(2). https://doi.org/10.17222/mit.2025.1575

Vancouver

Putra AG, Septianissa S, Pawawoi, Ikaningsih MA, Martoni, Martijanti, et al. MICROSTRUCTURAL EVOLUTION AND HARDNESS OF FERRITIC SUPERALLOYS CONTAINING NiAl-B2 AND L21–Ni2TiAl PRECIPITATES. Materiali in tehnologije. 2026;60(2). doi:10.17222/mit.2025.1575

BibTeX
@article{Putra2026,
  author = {Putra, Adi Ganda and Septianissa, Selly and Pawawoi and Ikaningsih, Manty Aldilani and Martoni and Martijanti and Mubarok, Mohammad Zaki and Ridwanulloh, Hafizh and Irawan, Jodi and Gamara, Ba’adilla Akhista},
  title = {MICROSTRUCTURAL EVOLUTION AND HARDNESS OF FERRITIC SUPERALLOYS CONTAINING NiAl-B2 AND L21–Ni2TiAl PRECIPITATES},
  journal = {Materiali in tehnologije},
  year = {2026},
  volume = {60},
  number = {2},
  doi = {10.17222/mit.2025.1575}
}
Kostenlos starten →