EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Creep‐Induced Microstructural Evolution in an A2‐B2 Superalloy

Liu Yang, Aparajita Pramanik, Sandipan Sen, Shubhashis Dixit, Marcel Muench, R. J. Vikram, Daniel Schliephake, Yolita M. Eggeler, Ankur Chauhan, Martin Heilmaier, Alexander Kauffmann

Advanced Engineering Materials · 09.09.2026 · 28 (17)

DOI: 10.1002/adem.202503180 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 30.05.2026. Verfasst von Liu Yang und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Chinese Government Scholarship, Infosys Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The refractory element‐based 27.3Ta‐27.3Mo‐27.3Ti‐8Cr‐10Al (at.%) high‐entropy alloy with a precipitation‐strengthened A2‐B2 microstructure exhibits substantial B2 raft formation and a transition in apparent creep exponent near 125 MPa at 1030°C. Using focused ion beam‐based 3D sectioning, the B2 precipitates were identified as having a plate‐like geometry, characterized by elongation on two orthogonal cut faces and faceting on the third face, a morphology that cannot be resolved by conventional 2D imaging. Electron backscatter diffraction analysis reveals the formation of low‐misorientation subgrain structures, consistent with dynamic recovery processes. Transmission electron microscopy (TEM) analyses reveal a change in dislocation–precipitate interaction with increasing applied stress. At low stresses, dislocation climb is confirmed, whereas at high stresses, deformation is likely associated with cross slip of screw dislocations. In the intermediate stress range, deformation is characterized by a combination of climb‐controlled dislocation–precipitate interaction, jogged‐screw dislocations, and the cutting of B2 precipitates by strongly coupled dislocation pairs. High‐resolution scanning TEM further confirms that the A2/B2 interface remains fully coherent across all creep conditions examined, maintaining structural stability under high‐temperature deformation.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Chinese Government Scholarship
  • Infosys Foundation

Zitieren

APA

Yang, L., Pramanik, A., Sen, S., Dixit, S., Muench, M., Vikram, R. J., Schliephake, D., Eggeler, Y. M., Chauhan, A., Heilmaier, M., & Kauffmann, A. (2026). Creep‐Induced Microstructural Evolution in an A2‐B2 Superalloy. Advanced Engineering Materials, 28(17). https://doi.org/10.1002/adem.202503180

Vancouver

Yang L, Pramanik A, Sen S, Dixit S, Muench M, Vikram RJ, et al. Creep‐Induced Microstructural Evolution in an A2‐B2 Superalloy. Advanced Engineering Materials. 2026;28(17). doi:10.1002/adem.202503180

BibTeX
@article{Yang2026,
  author = {Yang, Liu and Pramanik, Aparajita and Sen, Sandipan and Dixit, Shubhashis and Muench, Marcel and Vikram, R. J. and Schliephake, Daniel and Eggeler, Yolita M. and Chauhan, Ankur and Heilmaier, Martin and Kauffmann, Alexander},
  title = {Creep‐Induced Microstructural Evolution in an A2‐B2 Superalloy},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {17},
  doi = {10.1002/adem.202503180}
}
Kostenlos starten →