3D-PRINTED POLYLACTIC ACID REINFORCED CARBON FIBER IN BULK AND TRIPLY PERIODIC MINIMAL SURFACE (TPMS) LATTICE STRUCTURES: A MECHANICAL PROPERTIES COMPARATIVE STUDY
Materiali in tehnologije · 04.06.2026 · 60 (3)
DOI: 10.17222/mit.2025.1571 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materiali in tehnologije, online erschienen am 04.06.2026. Verfasst von Nabilah Afiqah Mohd Radzuan. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
Focusing on lightweight design while maintaining mechanical integrity at the highest levels has made triply periodic minimal surface (TPMS) lattice structures one of the promising structural concepts.1 Therefore, this study investigates the mechanical performance of polylactic acid (PLA) reinforced with 15 w/% carbon fiber (CF) in both bulk and TPMS lattice. Bulk PLA/CF (15 w/%) exhibited a 58.2 % increase in the tensile modulus over neat PLA, though stiffness decreased with the temperature due to matrix softening. Compression tests showed that the gyroid lattice structure achieved higher compressive strength (19.02 MPa) with stable energy absorption, while the honeycomb structure had greater stiffness (691.53 MPa) but lower strength (17.73 MPa). Finite element simulations confirmed these trends, highlighting stress localization in the honeycomb and a uniform stress distribution in the gyroid. Overall, gyroid lattices are preferable for energy absorption applications, whereas honeycomb structures are more suitable for stiffness-critical lightweight designs.
Zitieren
APA
Radzuan, N. A. M. (2026). 3D-PRINTED POLYLACTIC ACID REINFORCED CARBON FIBER IN BULK AND TRIPLY PERIODIC MINIMAL SURFACE (TPMS) LATTICE STRUCTURES: A MECHANICAL PROPERTIES COMPARATIVE STUDY. Materiali in tehnologije, 60(3). https://doi.org/10.17222/mit.2025.1571
Vancouver
Radzuan NAM. 3D-PRINTED POLYLACTIC ACID REINFORCED CARBON FIBER IN BULK AND TRIPLY PERIODIC MINIMAL SURFACE (TPMS) LATTICE STRUCTURES: A MECHANICAL PROPERTIES COMPARATIVE STUDY. Materiali in tehnologije. 2026;60(3). doi:10.17222/mit.2025.1571
BibTeX
@article{Radzuan2026,
author = {Radzuan, Nabilah Afiqah Mohd},
title = {3D-PRINTED POLYLACTIC ACID REINFORCED CARBON FIBER IN BULK AND TRIPLY PERIODIC MINIMAL SURFACE (TPMS) LATTICE STRUCTURES: A MECHANICAL PROPERTIES COMPARATIVE STUDY},
journal = {Materiali in tehnologije},
year = {2026},
volume = {60},
number = {3},
doi = {10.17222/mit.2025.1571}
}
EUVIMED