EUVIMEDScopri EUVIMED
Crossref

Friction-stir processing of a composite aluminium alloy (AA 1050) reinforced with titanium carbide powder

K. O. Sanusi, E. T. Akinlabi

Materiali in tehnologije · 2017-06-02 · 51 (3) · 427-435

DOI: 10.17222/mit.2016.021 ↗

At a glance

Journal article in Materiali in tehnologije, published online on 2017-06-19. Written by K. O. Sanusi and 1 co-authors. Cited 18 times so far (Crossref).

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

In this study the friction-stir processing (FSP) technique was applied for the development of surface composites of aluminium alloy (AA 1050) reinforced with titanium carbide (TiC) powder of particle size range below 60 μm compressed into the groove. Rotational speeds of 1200 min and 1600 min and the travel rates of (100, 200 and 300) mm/min were used for the process. This study investigates the effect of processing parameters on the wear-resistance behavior of friction-stir processed Al-TiC composites. This was achieved through microstructural characterization using optical and scanning electron (SEM) microscopes equipped with Oxford energy-dispersion spectrometry (EDS) (Tescan), microhardness profiling and wear resistance tests. From the results, it was found that the processing parameters influenced the distribution of the TiC particles. The microhardness profiling of the processed samples revealed an increase in the hardness value compared to the parent material. The wear-resistance test results confirmed the FSP technique enhanced properties in surface engineering.

Cite

APA

Sanusi, K. O., & Akinlabi, E. T. (2017). Friction-stir processing of a composite aluminium alloy (AA 1050) reinforced with titanium carbide powder. Materiali in tehnologije, 51(3), 427-435. https://doi.org/10.17222/mit.2016.021

Vancouver

Sanusi KO, Akinlabi ET. Friction-stir processing of a composite aluminium alloy (AA 1050) reinforced with titanium carbide powder. Materiali in tehnologije. 2017;51(3):427-435. doi:10.17222/mit.2016.021

BibTeX
@article{Sanusi2017,
  author = {Sanusi, K. O. and Akinlabi, E. T.},
  title = {Friction-stir processing of a composite aluminium alloy (AA 1050) reinforced with titanium carbide powder},
  journal = {Materiali in tehnologije},
  year = {2017},
  volume = {51},
  number = {3},
  pages = {427--435},
  doi = {10.17222/mit.2016.021}
}
Start for free →