Thermo-mechanical degradation of fibre–matrix bond and flexural behaviour in steel-fibre-reinforced concrete after elevated-temperature exposure
Magazine of Concrete Research · 07.07.2026 · 78 (9-10) · 581-595
DOI: 10.1680/jmacr.25.00458 ↗Kurz gefasst
Fachartikel in der Zeitschrift Magazine of Concrete Research, online erschienen am 16.06.2026. Verfasst von Xinrong Liu und 3 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Gefördert von: State Key Laboratory of Tropic Ocean Engineering Materials and Materials Evaluation.
Abstract (Originalsprache)
The thermo-mechanical degradation of fibre–matrix bond and the flexural behaviour of steel-fibre-reinforced concrete (SFRC) specimens subjected to elevated temperatures (200°C, 400°C and 600°C) were investigated. Fibre pull-out and four-point bending tests were conducted independently to characterise the temperature-dependent degradation of interfacial bond and flexural response. The results showed that moderate heating (400°C) enhanced the bond strength and pull-out energy to, respectively, 158% and 188% of their room-temperature (20°C) values, owing to frictional strengthening and preserved matrix integrity. Severe deterioration occurred at 600°C, and both indices decreased to approximately 63% of their reference values owing to microcracking and chemical bond loss. Flexural strength decreased progressively with temperature, retaining 42.8% for SFRC and 24.7% for plain concrete at 600°C. Despite matrix damage, the SFRC exhibited stable ductility and higher fracture toughness, confirming the sustained efficiency of fibre bridging under thermal degradation. These findings provide insights into the temperature-dependent fibre–matrix bond degradation and corresponding flexural response of SFRC within the investigated temperature range of 200–600°C.
Förderung
- State Key Laboratory of Tropic Ocean Engineering Materials and Materials Evaluation
Zitieren
APA
Liu, X., Wang, W., Zhang, Y., & Liu, J. (2026). Thermo-mechanical degradation of fibre–matrix bond and flexural behaviour in steel-fibre-reinforced concrete after elevated-temperature exposure. Magazine of Concrete Research, 78(9-10), 581-595. https://doi.org/10.1680/jmacr.25.00458
Vancouver
Liu X, Wang W, Zhang Y, Liu J. Thermo-mechanical degradation of fibre–matrix bond and flexural behaviour in steel-fibre-reinforced concrete after elevated-temperature exposure. Magazine of Concrete Research. 2026;78(9-10):581-595. doi:10.1680/jmacr.25.00458
BibTeX
@article{Liu2026,
author = {Liu, Xinrong and Wang, Wenjie and Zhang, Yunpeng and Liu, Jianxun},
title = {Thermo-mechanical degradation of fibre–matrix bond and flexural behaviour in steel-fibre-reinforced concrete after elevated-temperature exposure},
journal = {Magazine of Concrete Research},
year = {2026},
volume = {78},
number = {9-10},
pages = {581--595},
doi = {10.1680/jmacr.25.00458}
}
EUVIMED