Relative density estimation from shallow depth CPTs in siliceous sand: an updated approach
Geotechnical Research · 14.12.2026 · 13 (1) · 121-137
DOI: 10.1680/jgere.25.00045 ↗Kurz gefasst
Fachartikel in der Zeitschrift Geotechnical Research, online erschienen am 14.07.2026. Verfasst von Mathias Rolf Jensen. Die Arbeit nennt 29 Literaturangaben.
Abstract (Originalsprache)
Cone penetration tests (CPTs) in sands are governed by two distinct mechanisms: a shallow failure mode, which dominates in the upper ≈0.2–1.0 m of field CPTs, and a deep failure mode, which develops once sufficient embedment is achieved. Industry-standard correlations between CPT cone resistance (qc) and relative density (Dr) are calibrated under deep failure conditions, and their application in the shallow zone produces erroneous results. This paper reviews shallow depth interpretation methods and introduces an updated global model integrating shallow and deep penetration mechanisms. Building on Jensen (2024), the formulation addresses prior limitations through recalibration using controlled laboratory tests and a database of 132 onshore and offshore CPTs, enabling improved differentiation of near-surface densities and closer agreement with measured qc profiles. The model shows reduction in shallow-zone Dr bias relative to earlier approaches and is most reliable for clean, young, uncemented, uniformly graded siliceous sands under saturated or dry conditions. Deviations occur in sands of higher compressibility, increased fines content, or pronounced angularity, and within the top 2–4 cone diameters where mudline definition and minor cone disturbance become influential. Site-specific validation of the model against direct Dr measurements is required for reliable application, even within the calibrated range.
Zitieren
APA
Jensen, M. R. (2026). Relative density estimation from shallow depth CPTs in siliceous sand: an updated approach. Geotechnical Research, 13(1), 121-137. https://doi.org/10.1680/jgere.25.00045
Vancouver
Jensen MR. Relative density estimation from shallow depth CPTs in siliceous sand: an updated approach. Geotechnical Research. 2026;13(1):121-137. doi:10.1680/jgere.25.00045
BibTeX
@article{Jensen2026,
author = {Jensen, Mathias Rolf},
title = {Relative density estimation from shallow depth CPTs in siliceous sand: an updated approach},
journal = {Geotechnical Research},
year = {2026},
volume = {13},
number = {1},
pages = {121--137},
doi = {10.1680/jgere.25.00045}
}
EUVIMED