EUVIMEDEUVIMED entdecken
Crossref

Estimating relative density from shallow depth CPTs in normally consolidated and overconsolidated siliceous sand

Mathias Rolf Jensen

Canadian Geotechnical Journal · 01.01.2025 · 62 · 1-14

DOI: 10.1139/cgj-2024-0136 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Geotechnical Journal, erschienen am 01.01.2025. Verfasst von Mathias Rolf Jensen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 24 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Current interpretation of relative density ( D r ) based on cone penetration test (CPT) end resistance ( q c ) data in sand relies on empirical expressions established from calibration chamber studies for which a deep failure penetration mechanism is attained. These expressions are mainly based on stress normalised q c data. Previous studies have highlighted the importance of performing the normalisation procedure with respect to the mean effective stress ( p′) in overconsolidated (OC) sand deposits instead of the vertical effective stress ( σ′ v ) that has been used in normally consolidated deposits. Due to a large variation in the coefficient of earth pressure at rest ( K 0 ), on which p′ depends, in the uppermost 3–5 m of OC sand, a recent study has demonstrated a rigorous unified approach for estimating a varying K 0 with depth. However, the surficial shallow failure penetration effects are not accounted for, and consequently, interpretation of the upper 0.5–1.5 m of sand is still erroneous. This depth range is very important for low-stress geotechnical applications such as offshore flowlines and mudmats. With a reinterpretation of previously published data, a new global model is presented that potentially enables estimation of D r from shallow CPTs in siliceous sand by taking into account both the shallow failure penetration effects (important in the uppermost 0.5–1.5 m) as well as the varying K 0 with depth for OC sand (important in the uppermost 3–5 m). However, the new model needs future calibration with controlled laboratory testing.

Zitieren

APA

Jensen, M. R. (2025). Estimating relative density from shallow depth CPTs in normally consolidated and overconsolidated siliceous sand. Canadian Geotechnical Journal, 62, 1-14. https://doi.org/10.1139/cgj-2024-0136

Vancouver

Jensen MR. Estimating relative density from shallow depth CPTs in normally consolidated and overconsolidated siliceous sand. Canadian Geotechnical Journal. 2025;62:1-14. doi:10.1139/cgj-2024-0136

BibTeX
@article{Jensen2025,
  author = {Jensen, Mathias Rolf},
  title = {Estimating relative density from shallow depth CPTs in normally consolidated and overconsolidated siliceous sand},
  journal = {Canadian Geotechnical Journal},
  year = {2025},
  volume = {62},
  pages = {1--14},
  doi = {10.1139/cgj-2024-0136}
}
Kostenlos starten →