EUVIMEDEUVIMED entdecken
Crossref

Microscopic Analysis of 3D-Printed Resin Composites for Definitive Restorations

Pesquisa Brasileira em Odontopediatria e Clínica Integrada · 2026

DOI: 10.1590/pboci.2026.065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pesquisa Brasileira em Odontopediatria e Clínica Integrada, 2026.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To characterize the microscopic structure and surface properties of commercially available 3D-printed resin composites using Scanning Electron Microscopy (SEM) to assess their clinical applicability and durability. Material and Methods: Four different 3D-printed resin composites were analyzed. Specimens were fabricated under controlled conditions, followed by standardized cleaning, post-curing, and polishing procedures. SEM imaging was performed at various magnifications to evaluate filler distribution, particle morphology, and surface integrity.

Results

The analysis revealed significant differences among the tested resins. Varseo Smile Crown Plus (Bego) exhibited the most homogeneous microstructure, with a high filler content, nanoscale particles, and strong polymer-filler integration, suggesting superior mechanical properties. Biocrown and Nanolabs resins showed intermediate levels of filler content and particle distribution. At the same time, Printax AA Temp had the lowest inorganic content and the highest incidence of structural defects, including layer discontinuities and cracks.

Conclusion

The structural and surface characteristics of 3D-printed resin composites vary significantly among different commercial brands. Varseo Smile Crown Plus demonstrated the most promising properties for clinical applications, while other materials showed limitations related to filler distribution and structural integrity. Further studies on mechanical performance and long-term stability are needed to optimize the application of these materials in definitive restorations.

Zitieren

APA

(2026). Microscopic Analysis of 3D-Printed Resin Composites for Definitive Restorations. Pesquisa Brasileira em Odontopediatria e Clínica Integrada. https://doi.org/10.1590/pboci.2026.065

Vancouver

Microscopic Analysis of 3D-Printed Resin Composites for Definitive Restorations. Pesquisa Brasileira em Odontopediatria e Clínica Integrada. 2026. doi:10.1590/pboci.2026.065

BibTeX
@article{euvimed2026,
  title = {Microscopic Analysis of 3D-Printed Resin Composites for Definitive Restorations},
  journal = {Pesquisa Brasileira em Odontopediatria e Clínica Integrada},
  year = {2026},
  doi = {10.1590/pboci.2026.065}
}
Kostenlos starten →