Heterogeneously Integrated C-band p-i-n Type Mach-Zehnder Modulators Utilizing InP Chips on SOI Wafer Bonding Technology
IEICE Transactions on Electronics · 01.11.2026 · E109.C (11) · 583-589
DOI: 10.1587/transele.2025oci0001 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEICE Transactions on Electronics, erschienen am 01.11.2026. Verfasst von Hajime TANAKA und 10 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.
Abstract (Originalsprache)
We report an InP/Si heterogeneously integrated C-band p-i-n type Mach-Zehnder modulator (MZM) using InP chips on SOI wafer bonding. This MZM employs Si waveguides for the miniaturization of devices and the quantum confined Stark effect (QCSE) of InP-based quantum-well structures for highly efficient modulation. Thermo-optic (TO) phase adjusters are placed on each Si waveguide arm for changing the refractive index. A two-storied taper structure enabling a low-loss optical transition between Si waveguide and InP ridge waveguides is realized through precise alignment (< ±100 nm) achieved by stepper lithography after chip bonding. We fabricated two types of MZMs. The first was a single-channel MZM exhibiting a high modulation efficiency of VπL = 0.43 Vcm and a high electrical/optical (EO) 3 dB bandwidth of 73 GHz, with a half-wavelength voltage (Vπ) of = 7.2 V (electrode length: 1 mm, filling factor (FF) of electrode: 60%). Subsequently, we fabricated an In-phase and Quadrature (IQ) modulator incorporating four MZMs, achieving a device size of 3.8 mm × 3.3 mm. Each of the four MZMs within the IQ modulator achieved similar performance to the single MZM, attaining an EO 3 dB bandwidth of 60 GHz and Vπ = 6 V (electrode length: 0.9 mm, FF: 80%). These results demonstrate that heterogeneously integrated MZMs using InP chips on SOI wafer bonding are highly promising for achieving both high modulation efficiency and wide bandwidth operation.
Zitieren
APA
TANAKA, H., KASUYA, N., MISAWA, T., KOMATSU, K., INOUE, N., KIKUCHI, T., MITARAI, T., KIMURA, S., FUJIWARA, N., NISHIYAMA, N., & YAGI, H. (2026). Heterogeneously Integrated C-band p-i-n Type Mach-Zehnder Modulators Utilizing InP Chips on SOI Wafer Bonding Technology. IEICE Transactions on Electronics, E109.C(11), 583-589. https://doi.org/10.1587/transele.2025oci0001
Vancouver
TANAKA H, KASUYA N, MISAWA T, KOMATSU K, INOUE N, KIKUCHI T, et al. Heterogeneously Integrated C-band p-i-n Type Mach-Zehnder Modulators Utilizing InP Chips on SOI Wafer Bonding Technology. IEICE Transactions on Electronics. 2026;E109.C(11):583-589. doi:10.1587/transele.2025oci0001
BibTeX
@article{TANAKA2026,
author = {TANAKA, Hajime and KASUYA, Naotaka and MISAWA, Taichi and KOMATSU, Kento and INOUE, Naoko and KIKUCHI, Takehiko and MITARAI, Takuya and KIMURA, Shun and FUJIWARA, Naoki and NISHIYAMA, Nobuhiko and YAGI, Hideki},
title = {Heterogeneously Integrated C-band p-i-n Type Mach-Zehnder Modulators Utilizing InP Chips on SOI Wafer Bonding Technology},
journal = {IEICE Transactions on Electronics},
year = {2026},
volume = {E109.C},
number = {11},
pages = {583--589},
doi = {10.1587/transele.2025oci0001}
}
EUVIMED