InP/Si Heterogeneously Integrated Tunable Laser by Utilizing Chip-on-Wafer Bonding Method
Journal of Lightwave Technology · 15.02.2025 · 43 (4) · 1708-1715
DOI: 10.1109/jlt.2024.3450093 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 15.02.2025. Verfasst von Takuo Hiratani und 12 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 24 Literaturangaben. Gefördert von: New Energy and Industrial Technology Development Organization, Advanced Research Infrastructure for Materials and Nanotechnology in Japan, Ministry of Education, Culture, Sports, Science and Technology.
Abstract (Originalsprache)
A hybrid tunable laser consisting of the InP gain region and Si photonic integrated circuits (PICs) is demonstrated using a chip-on-wafer (CoW) bonding method. In order to investigate the feasibility of the III-V/Si heterogeneous integration with CoW bonding, integration of various InP chips on Si PICs and a reliability test of InP/Si hybrid lasers are carried out. The InP chips with different epitaxial layers for various active devices are successfully bonded on Si PICs, and photoluminescence spectra with designed peak wavelengths are observed for each InP chips. The stable continuous-wave operation of InP/Si hybrid Fabry-Perot lasers is also verified from an aging test with the total aging time of 3,000 hours. We propose an InP ridge/Si slab waveguide structure for the improvement of light output characteristics and stable wavelength tunable operation, and an InP/Si hybrid tunable laser with this structure is fabricated by the CoW bonding. The fabricated tunable laser exhibits a maximum light output power of 11.3 mW, and stable single mode operation with a sub-mode suppression ratio of higher than 53 dB and a narrow spectral linewidth of less than 60 kHz are also successfully achieved for the entire wavelength tuning range of 56 nm.
Förderung
- New Energy and Industrial Technology Development Organization
- Advanced Research Infrastructure for Materials and Nanotechnology in Japan
- Ministry of Education, Culture, Sports, Science and Technology
Zitieren
APA
Hiratani, T., Fujiwara, N., Inoue, N., Kikuchi, T., Okimoto, T., Mitarai, T., Kurokawa, M., Tanaka, H., Fujikata, H., Watanabe, T., Nitta, T., Nishiyama, N., & Yagi, H. (2025). InP/Si Heterogeneously Integrated Tunable Laser by Utilizing Chip-on-Wafer Bonding Method. Journal of Lightwave Technology, 43(4), 1708-1715. https://doi.org/10.1109/jlt.2024.3450093
Vancouver
Hiratani T, Fujiwara N, Inoue N, Kikuchi T, Okimoto T, Mitarai T, et al. InP/Si Heterogeneously Integrated Tunable Laser by Utilizing Chip-on-Wafer Bonding Method. Journal of Lightwave Technology. 2025;43(4):1708-1715. doi:10.1109/jlt.2024.3450093
BibTeX
@article{Hiratani2025,
author = {Hiratani, Takuo and Fujiwara, Naoki and Inoue, Naoko and Kikuchi, Takehiko and Okimoto, Takuya and Mitarai, Takuya and Kurokawa, Munetaka and Tanaka, Hajime and Fujikata, Hidenari and Watanabe, Tohma and Nitta, Toshiyuki and Nishiyama, Nobuhiko and Yagi, Hideki},
title = {InP/Si Heterogeneously Integrated Tunable Laser by Utilizing Chip-on-Wafer Bonding Method},
journal = {Journal of Lightwave Technology},
year = {2025},
volume = {43},
number = {4},
pages = {1708--1715},
doi = {10.1109/jlt.2024.3450093}
}
EUVIMED