Analysis of burnishing parameters on surface finish of non-ferrous material
Pollack Periodica · 08.06.2026
DOI: 10.1556/606.2026.01563 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pollack Periodica, erschienen am 08.06.2026. Verfasst von Uddhav M. Shirsat und 4 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Ball burnishing is a cold forming process in which a rolling ball plastically deforms a surface to improve finish and mechanical properties. This study presents the development of a combined turning and hydraulically controlled ball burnishing tool. Experiments were conducted on a TurnMaster T-40 lathe using a 2 3 factorial design to optimize surface finish on brass with SAE-30 oil, SAE-40 oil, and kerosene as lubricants. Surface roughness was measured before and after burnishing. Analysis of variance and F -test results show that burnishing force is the most significant parameter, followed by speed and feed. The best result was achieved with SAE-30 oil, reducing roughness from 0.33–0.65 µm to 0.0107 µm.
Zitieren
APA
Shirsat, U. M., Bagade, P. M., Somatkar, A., Kulkarni, A., & Erdei, T. I. (2026). Analysis of burnishing parameters on surface finish of non-ferrous material. Pollack Periodica. https://doi.org/10.1556/606.2026.01563
Vancouver
Shirsat UM, Bagade PM, Somatkar A, Kulkarni A, Erdei TI. Analysis of burnishing parameters on surface finish of non-ferrous material. Pollack Periodica. 2026. doi:10.1556/606.2026.01563
BibTeX
@article{Shirsat2026,
author = {Shirsat, Uddhav M. and Bagade, Pramodkumar M. and Somatkar, Avinash and Kulkarni, Atul and Erdei, Timotei István},
title = {Analysis of burnishing parameters on surface finish of non-ferrous material},
journal = {Pollack Periodica},
year = {2026},
doi = {10.1556/606.2026.01563}
}
EUVIMED