EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Fracture Resistance of CAD-CAM Interim Crowns Fabricated by Additive Versus Subtractive Manufacturing: An In Vitro Study

Leonard Walter Huamani Diaz, Kelly Romero, Ricardo Fabian Reyes Mansilla, Iliana Linares, Consuelo Marroquín-Soto, César-Augusto Padilla-Avalos

Odovtos - International Journal of Dental Sciences · 24.07.2026 · 1 (1)

DOI: 10.15517/xs2z9z62 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Odovtos - International Journal of Dental Sciences, online erschienen am 24.07.2026. Verfasst von Leonard Walter Huamani Diaz und 5 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing has gained increasing popularity for the fabrication of interim restorations because of its efficiency, reduced material waste, and workflow flexibility. However, concerns remain regarding the mechanical reliability of additively manufactured materials compared with CAD-CAM-milled restorations. This in vitro study compared the fracture resistance of interim crowns fabricated by additive manufacturing and CAD-CAM milling. Twenty standardized interim crowns were digitally designed and distributed into two groups according to the manufacturing technique (n=10): additively manufactured crowns fabricated with a ceramic-filled nanohybrid resin using LCD technology, and CAD-CAM-milled crowns fabricated from prepolymerized polymethyl methacrylate (PMMA) blocks. Fracture resistance was evaluated under compressive loading using a universal testing machine at a crosshead speed of 1 mm/min until failure. Data were analyzed with the Shapiro-Wilk test and independent t test (α=.05). CAD-CAM-milled crowns demonstrated significantly higher fracture resistance than additively manufactured crowns, with mean values of 439.1±24.0 kgf (4306±235 N) and 244.7±34.9 kgf (2399±342 N), respectively. The findings suggest that the manufacturing technique significantly influences the mechanical performance of interim restorations, with CAD-CAM-milled PMMA crowns exhibiting greater resistance to compressive loading under the conditions evaluated.

Zitieren

APA

Diaz, L. W. H., Romero, K., Mansilla, R. F. R., Linares, I., Marroquín-Soto, C., & Padilla-Avalos, C. (2026). Fracture Resistance of CAD-CAM Interim Crowns Fabricated by Additive Versus Subtractive Manufacturing: An In Vitro Study. Odovtos - International Journal of Dental Sciences, 1(1). https://doi.org/10.15517/xs2z9z62

Vancouver

Diaz LWH, Romero K, Mansilla RFR, Linares I, Marroquín-Soto C, Padilla-Avalos C. Fracture Resistance of CAD-CAM Interim Crowns Fabricated by Additive Versus Subtractive Manufacturing: An In Vitro Study. Odovtos - International Journal of Dental Sciences. 2026;1(1). doi:10.15517/xs2z9z62

BibTeX
@article{Diaz2026,
  author = {Diaz, Leonard Walter Huamani and Romero, Kelly and Mansilla, Ricardo Fabian Reyes and Linares, Iliana and Marroquín-Soto, Consuelo and Padilla-Avalos, César-Augusto},
  title = {Fracture Resistance of CAD-CAM Interim Crowns Fabricated by Additive Versus Subtractive Manufacturing: An In Vitro Study},
  journal = {Odovtos - International Journal of Dental Sciences},
  year = {2026},
  volume = {1},
  number = {1},
  doi = {10.15517/xs2z9z62}
}
Kostenlos starten →