EUVIMEDUpptäck EUVIMED
Open access · CC BY 4.0

Heat recovery and desiccant wheel effect on energy saving of a solar cooling system

Christian Chikezie Aka, Thomas Okechukwu Onah, Barnabas Uchenna Ugwuanyi

Challenges and Issues of Modern Science · 2026-06-28 · 5 (1) · 342

DOI: 10.15421/cims.5.342 ↗

At a glance

Journal article in Challenges and Issues of Modern Science, published online on 2026-06-28. Written by Christian Chikezie Aka and 2 co-authors. 35 references. The full text is freely available (open access, CC BY 4.0).

AbstractBibliografiska uppgifterCiteRelated studies

Abstract (original language)

Purpose

This paper investigates the integration of a desiccant wheel into a conventional solar cooling system and the feasibility of recovering the heat rejected by the absorption chiller to regenerate the desiccant wheel, thereby improving overall system energy efficiency.

Findings

The proposed system achieves solar energy savings of 18–31.5% compared to a conventional solar cooling system, depending on operating conditions. Design /Method / Approach. Mathematical models for each major component—evacuated tube solar collectors, single-stage and half-effect NH₃–H₂O absorption chillers, and a silica-gel desiccant wheel—were developed and validated against experimental data. A parametric analysis was conducted to evaluate the effects of ambient temperature, relative humidity, fresh air fraction, and regeneration temperature on system performance. Theoretical Implications. The study demonstrates that the simultaneous use of absorption and adsorption thermodynamic cycles, coupled through heat recovery, provides a theoretically grounded pathway to improving the coefficient of performance of solar-driven air conditioning systems. Practical Implications. The findings offer HVAC engineers and building designers a validated configuration for reducing solar collector area and energy consumption in solar cooling installations, particularly in hot-humid climates such as subtropical Australia. Originality / Value. Unlike previous studies that treat absorption cooling and desiccant dehumidification as independent subsystems, this work is among the first to propose recovering the absorption chiller’s rejected heat specifically for desiccant regeneration, creating a synergistic coupling that eliminates a dedicated regeneration heat source. Research Limitations / Future Research. The study is based on steady-state simulation models; experimental validation of the integrated system and transient performance analysis remain as future work. Economic and life-cycle cost analyses were not included. Article Type. Applied Research.

Cite

APA

Aka, C. C., Onah, T. O., & Ugwuanyi, B. U. (2026). Heat recovery and desiccant wheel effect on energy saving of a solar cooling system. Challenges and Issues of Modern Science, 5(1), 342. https://doi.org/10.15421/cims.5.342

Vancouver

Aka CC, Onah TO, Ugwuanyi BU. Heat recovery and desiccant wheel effect on energy saving of a solar cooling system. Challenges and Issues of Modern Science. 2026;5(1):342. doi:10.15421/cims.5.342

BibTeX
@article{Aka2026,
  author = {Aka, Christian Chikezie and Onah, Thomas Okechukwu and Ugwuanyi, Barnabas Uchenna},
  title = {Heat recovery and desiccant wheel effect on energy saving of a solar cooling system},
  journal = {Challenges and Issues of Modern Science},
  year = {2026},
  volume = {5},
  number = {1},
  pages = {342},
  doi = {10.15421/cims.5.342}
}
Start for free →