AUTOMATED SETUP FOR MONITORING THE NATURAL VIBRATION FREQUENCIES OF WORKING BLADES OF AIRCRAFT ENGINE TURBINE BLISKS
Journal of Rocket-Space Technology · 2026-11-02 · 35 (3) · 44-52
DOI: 10.15421/452583 ↗At a glance
Journal article in Journal of Rocket-Space Technology, published online on 2026-11-02. Written by Yurii Kovalenko and 4 co-authors. 19 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
The subject of this paper is a device for natural frequency quality control of turbine blisk rotor blades in aircraft gas turbine engines. The purpose is to develop and test the setup, and subsequently use it in production, enabling the monitoring of the natural frequencies of vibration of turbine blisk working blades while excluding the influence of the coupled disk–blade vibratory system. The following tasks were addressed: investigation of the frequency response characteristics of the blisk; identification of optimal damping locations for the disk and adjacent blades; design of a vibration exciter based on a stacked piezoelectric actuator and a non-contact capacitive sensor; and verification of the device against criteria of stability, accuracy, and repeatability of results. The following methods were applied: analytical calculation of the exciter natural frequency, computational experiment with spectral analysis of blisk vibrations, and full-scale validation of the device. The following results were obtained. The vibration spectrum of the blisk was constructed over the range f = 0…10000 Hz, and the following mode shape families were identified: nodal diameter disk vibrations with two, three, and four nodal diameters (f = 3705, 4624, and 4833 Hz, respectively); disk vibrations with one nodal circle along the rim (f = 5127 Hz); coupled blade–disk vibrations with four and six sectors (f = 6366 and 8095 Hz). The family of blade bending mode shapes spans the range f = 4670…6366 Hz. Optimal locations and methods were established for damping the disk (via the flow-path shelf) and adjacent blades (via the peripheral airfoil section). The fundamental natural frequency of the piezoelectric stack (ω = 9820 Hz) substantially exceeds the upper boundary of the blade frequency range, thereby guaranteeing the absence of spurious excitation. Frequency registration by a capacitive sensor positioned at the blade suction surface provides a reliable non-contact signal independent of ambient equipment noise. Conclusions. The developed device ensures excitation of resonant natural vibrations of the inspected blade airfoil in its first bending mode shape independently from the blade-disk system, eliminates the influence of spurious frequencies throughout the required measurement range, implements a vibration excitation method free from human-factor effects, and enables automated accumulation of a statistical database for establishing the blade natural frequency acceptance band.
Cite
APA
Kovalenko, Y., Mykhaylov, Y., Lazarieva, O., Torba, Y., & Torba, K. (2026). AUTOMATED SETUP FOR MONITORING THE NATURAL VIBRATION FREQUENCIES OF WORKING BLADES OF AIRCRAFT ENGINE TURBINE BLISKS. Journal of Rocket-Space Technology, 35(3), 44-52. https://doi.org/10.15421/452583
Vancouver
Kovalenko Y, Mykhaylov Y, Lazarieva O, Torba Y, Torba K. AUTOMATED SETUP FOR MONITORING THE NATURAL VIBRATION FREQUENCIES OF WORKING BLADES OF AIRCRAFT ENGINE TURBINE BLISKS. Journal of Rocket-Space Technology. 2026;35(3):44-52. doi:10.15421/452583
BibTeX
@article{Kovalenko2026,
author = {Kovalenko, Yurii and Mykhaylov, Yuriy and Lazarieva, Olha and Torba, Yuriy and Torba, Kyryl},
title = {AUTOMATED SETUP FOR MONITORING THE NATURAL VIBRATION FREQUENCIES OF WORKING BLADES OF AIRCRAFT ENGINE TURBINE BLISKS},
journal = {Journal of Rocket-Space Technology},
year = {2026},
volume = {35},
number = {3},
pages = {44--52},
doi = {10.15421/452583}
}
EUVIMED