EUVIMEDEUVIMED entdecken
Crossref

Boosting power efficiency in polycrystalline silicon solar cells: antimony selenide sputter coating with advanced optical, electrical, and thermal insights

R. M. Reddy, S. Chirag, T. Anu, A. R. Venkataramanan, S. Karthikeyan, D. Palaniswamy, E. Venugopal Goud, N. Dineshbabu, T. Thirugnanasambandham

Chalcogenide Letters · 15.07.2025 · 22 (7) · 615-624

DOI: 10.15251/cl.2025.227.615 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chalcogenide Letters, online erschienen am 15.07.2025. Verfasst von R. M. Reddy und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 19 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solar cells can transform light energy into electrical energy, possibly removing the need for fossil fuel energy resources. Reflection loss in solar cells is a factor contributing to diminished power conversion efficiency, which can be solved through using antireflective coatings on the cell surface. The present research primarily focuses on the development and application of antireflection coatings on the top surface of silicon solar cells. Sb2Se3 was deposited over multi-crystalline Si cells with different durations from 15 to 60 minutes. The influence of thin film Sb2Se3 coated cells was investigated through optical, current, voltage and thermal study. The ideal thickness of the Sb2Se3 coating was determined to be 1.336 µm for SB3 sample using FESEM. The lowest optical reflectance of 5.8% and highest absorbance of 93.4% was reached after 45 minutes of coating (SB3) across the 300 to 1200 nm wavelength band. The minimum electrical resistivity of a 45-minute coated Sb2Se3 sample was determined as 5.09×10−3 Ω-cm. The improved power conversion efficiency of Sb2Se3 coated solar cell under open sunlight setting was increased from 15.31 to 21.18% particularly for SB3 solar cell sample, which optimize maximum transfer of incident photons into the solar cell. From the observed results, it indicates that Sb2Se3 nanocoating has identified to be ideal antireflection coating material for polycrystalline silicon solar cells.

Zitieren

APA

Reddy, R. M., Chirag, S., Anu, T., Venkataramanan, A. R., Karthikeyan, S., Palaniswamy, D., Goud, E. V., Dineshbabu, N., & Thirugnanasambandham, T. (2025). Boosting power efficiency in polycrystalline silicon solar cells: antimony selenide sputter coating with advanced optical, electrical, and thermal insights. Chalcogenide Letters, 22(7), 615-624. https://doi.org/10.15251/cl.2025.227.615

Vancouver

Reddy RM, Chirag S, Anu T, Venkataramanan AR, Karthikeyan S, Palaniswamy D, et al. Boosting power efficiency in polycrystalline silicon solar cells: antimony selenide sputter coating with advanced optical, electrical, and thermal insights. Chalcogenide Letters. 2025;22(7):615-624. doi:10.15251/cl.2025.227.615

BibTeX
@article{Reddy2025,
  author = {Reddy, R. M. and Chirag, S. and Anu, T. and Venkataramanan, A. R. and Karthikeyan, S. and Palaniswamy, D. and Goud, E. Venugopal and Dineshbabu, N. and Thirugnanasambandham, T.},
  title = {Boosting power efficiency in polycrystalline silicon solar cells: antimony selenide sputter coating with advanced optical, electrical, and thermal insights},
  journal = {Chalcogenide Letters},
  year = {2025},
  volume = {22},
  number = {7},
  pages = {615--624},
  doi = {10.15251/cl.2025.227.615}
}
Kostenlos starten →