Bayesian optimization of single-pulse laser drilling using advanced image processing
tm - Technisches Messen · 28.07.2025 · 92 (7-8) · 332-342
DOI: 10.1515/teme-2025-0012 ↗Kurz gefasst
Fachartikel in der Zeitschrift tm - Technisches Messen, online erschienen am 04.06.2025. Verfasst von Manuel Klaiber und 8 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg.
Abstract (Originalsprache)
A significant challenge in laser drilling is the optimization of process parameters and drilling strategies to achieve high-quality holes. This is further complicated by the fact that quality assessment is a manual and time-consuming task. This paper presents a methodology designed to significantly reduce the manual effort required in optimizing parameters for single-pulse laser drilling of 0.3 mm thick stainless steel. The objective is to precisely drill holes with an entry diameter of 70 µm and an exit diameter of 20 µm, achieving high roundness. The features of the drilled holes were extracted automatically from the raw data. The outcomes were compared against manual measurements. Results indicate that the mean deviations between automated and manual measurements for both inlet and outlet diameters are less than 1.5 µm. Based on the results of the feature extraction, we employed a Bayesian optimization algorithm to efficiently explore the parameter space without the need for incorporating expert knowledge. The approach rapidly identified optimal drilling parameters after only a few iterations, significantly expediting the optimization process and considerably reducing manual labor.
Förderung
- Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg
Zitieren
APA
Klaiber, M., Hug, M., Schneller, L., Can, Ö., Jahn, A., Fehrenbacher, A., Haas, M., Reimann, P., & Michalowski, A. (2025). Bayesian optimization of single-pulse laser drilling using advanced image processing. tm - Technisches Messen, 92(7-8), 332-342. https://doi.org/10.1515/teme-2025-0012
Vancouver
Klaiber M, Hug M, Schneller L, Can Ö, Jahn A, Fehrenbacher A, et al. Bayesian optimization of single-pulse laser drilling using advanced image processing. tm - Technisches Messen. 2025;92(7-8):332-342. doi:10.1515/teme-2025-0012
BibTeX
@article{Klaiber2025,
author = {Klaiber, Manuel and Hug, Mathias and Schneller, Lukas and Can, Ömer and Jahn, Andreas and Fehrenbacher, Axel and Haas, Michael and Reimann, Peter and Michalowski, Andreas},
title = {Bayesian optimization of single-pulse laser drilling using advanced image processing},
journal = {tm - Technisches Messen},
year = {2025},
volume = {92},
number = {7-8},
pages = {332--342},
doi = {10.1515/teme-2025-0012}
}
EUVIMED