Bearing Capacity of the Working Platform with Kinematic Method
Studia Geotechnica et Mechanica · 2015
DOI: 10.1515/sgem-2015-0001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Studia Geotechnica et Mechanica, 2015. Verfasst von Katarzyna Białek und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).
Abstract (Originalsprache)
Bearing capacity of the working platform for heavy tracks was analysed using Distinct Layout Optimization (DLO) method. The platform layer constructed from cohesionless soils is resting on weak cohesive subgrade. Different thickness of the platform, its effective angle of internal friction and undrained shear strength of the soft soil were taken into consideration. Kinematic method permits different failure mechanisms to be analyzed. Margin of safety for a given load and subsoil conditions was determined using two approaches: increasing the load or decreasing the shear strength up to failure. The results were compared with solution proposed in BRE recommendations.
Zitieren
APA
Białek, K., & Bałachowski, L. (2015). Bearing Capacity of the Working Platform with Kinematic Method. Studia Geotechnica et Mechanica. https://doi.org/10.1515/sgem-2015-0001
Vancouver
Białek K, Bałachowski L. Bearing Capacity of the Working Platform with Kinematic Method. Studia Geotechnica et Mechanica. 2015. doi:10.1515/sgem-2015-0001
BibTeX
@article{Biaek2015,
author = {Białek, Katarzyna and Bałachowski, Lech},
title = {Bearing Capacity of the Working Platform with Kinematic Method},
journal = {Studia Geotechnica et Mechanica},
year = {2015},
doi = {10.1515/sgem-2015-0001}
}
EUVIMED