EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Method of Increasing the Load-Bearing Capacity of Beam Structures

I. Popov

Russian Journal of Construction Science and Technology · 17.01.2025 · 10 (2) · 1002005

DOI: 10.15826/rjcst.2024.2.005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Russian Journal of Construction Science and Technology, online erschienen am 17.01.2025. Verfasst von I. Popov. Die Arbeit nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is noted that I-beams have the greatest load-bearing capacity. At the same time, due to the wide distribution and availability of pipe rolling, tubular beams are often used in practice. The load-bearing capacity of an I-beam is almost twice as high as that of a tubular one. The purpose of this work is to increase the load-bearing capacity of tubular beams, which will expand the range of building structures. A geometric long body, the lateral surface of which has a rectilinear generatrix, has a maximum volume (for a given lateral surface) if its cross section has the shape of a circle, which corresponds to a round pipe. A tubular beam with liquid filler is a round pipe plugged at both ends, completely (without air cavities) filled with liquid. When a hydraulic beam is loaded, its side surface tends to deform. Consequently, the internal volume of the pipe tends to decrease. But, since the liquid is incompressible, it does not allow a decrease in volume, which, in turn, prevents the pipe from deforming. In a hydraulic beam, the entire load, thanks to the fluid, is distributed relatively evenly over the entire inner surface of the beam. An estimate was obtained that the load-bearing capacity of the hydraulic beam is five times greater than that of an I-beam and ten times greater than that of a tubular beam.

Zitieren

APA

Popov, I. (2025). Method of Increasing the Load-Bearing Capacity of Beam Structures. Russian Journal of Construction Science and Technology, 10(2), 1002005. https://doi.org/10.15826/rjcst.2024.2.005

Vancouver

Popov I. Method of Increasing the Load-Bearing Capacity of Beam Structures. Russian Journal of Construction Science and Technology. 2025;10(2):1002005. doi:10.15826/rjcst.2024.2.005

BibTeX
@article{Popov2025,
  author = {Popov, I.},
  title = {Method of Increasing the Load-Bearing Capacity of Beam Structures},
  journal = {Russian Journal of Construction Science and Technology},
  year = {2025},
  volume = {10},
  number = {2},
  pages = {1002005},
  doi = {10.15826/rjcst.2024.2.005}
}
Kostenlos starten →