EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on damage evolution mechanisms under compressive and tensile tests of plain weave SiC f /SiC composites using in situ X-ray CT

Jiangxing Wu, Hanhuan Wang, Yantao Gao, Lijuan Sun

Science and Engineering of Composite Materials · 16.01.2024 · 31 (1)

DOI: 10.1515/secm-2022-0233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Science and Engineering of Composite Materials, online erschienen am 16.01.2024. Verfasst von Jiangxing Wu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the damage evolution and failure mechanisms of fiber-reinforced composite materials under complex conditions, this study conducted in situ X-ray computed tomography (CT) compression and tensile tests on plain weave two-dimensional woven SiC/SiC composite materials. The obtained CT in situ image data captured the behavior of materials during loading and after failure. Using the image reconstruction of CT data, the actual microstructure and damage evolution of the material under six consecutive loading levels were accurately revealed. Three-dimensional visualization models of the composite material were established using image processing software to analyze the damage evolution under compression and tension, and the failure mechanisms were compared. The results showed that the compression and tension failure mechanisms of SiC/SiC composite materials were similar, with the transverse cracking of the matrix being the first mode of damage, followed by delamination between layers and longitudinal matrix cracking of fiber bundles. Specifically, in terms of compression failure, the strength of the fiber bundle itself has a greater influence, and fiber fracture is the main cause of ultimate material failure. On the other hand, the primary cause of tensile failure is the presence of porosity defects generated during material fabrication. Consequently, the tensile material fails earlier and can withstand lower loads.

Zitieren

APA

Wu, J., Wang, H., Gao, Y., & Sun, L. (2024). Research on damage evolution mechanisms under compressive and tensile tests of plain weave SiC f /SiC composites using in situ X-ray CT. Science and Engineering of Composite Materials, 31(1). https://doi.org/10.1515/secm-2022-0233

Vancouver

Wu J, Wang H, Gao Y, Sun L. Research on damage evolution mechanisms under compressive and tensile tests of plain weave SiC f /SiC composites using in situ X-ray CT. Science and Engineering of Composite Materials. 2024;31(1). doi:10.1515/secm-2022-0233

BibTeX
@article{Wu2024,
  author = {Wu, Jiangxing and Wang, Hanhuan and Gao, Yantao and Sun, Lijuan},
  title = {Research on damage evolution mechanisms under compressive and tensile tests of plain weave SiC f /SiC composites using in situ X-ray CT},
  journal = {Science and Engineering of Composite Materials},
  year = {2024},
  volume = {31},
  number = {1},
  doi = {10.1515/secm-2022-0233}
}
Kostenlos starten →