Evaluation of mechanical properties of sandwich panels with glass fibre face sheets and 3D printed PLA core
REVIEWS ON ADVANCED MATERIALS SCIENCE · 23.01.2026 · 65 (1)
DOI: 10.1515/rams-2025-0258 ↗Kurz gefasst
Fachartikel in der Zeitschrift REVIEWS ON ADVANCED MATERIALS SCIENCE, online erschienen am 24.07.2026. Verfasst von Mahdi Hosseini und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Glass fibre-reinforced sandwich composite laminates with 3D-printed polylactic acid (PLA) cores were fabricated to investigate the effect of nanoparticle-modified epoxy matrices on physical, mechanical, and environmental performance. Three laminates (GF/GF/GF/PLA/GF/GF/GF) with identical stacking sequences were prepared using a hand lay-up process, incorporating aluminium oxide (Al 2 O 3 ) and reduced graphene oxide (rGO) nanoparticles at 1 wt% into the epoxy matrix. The laminates were evaluated through density measurement, moisture absorption, tensile, compression, and impact testing. Results show that nanoparticle incorporation significantly enhances mechanical performance. The rGO-reinforced laminate exhibited the highest tensile strength (∼166 MPa) and compressive strength (∼122 MPa), representing improvements of approximately 5–17 % compared to the baseline laminate. In contrast, the Al 2 O 3 -reinforced laminate demonstrated superior impact energy absorption due to particle-induced energy dissipation mechanisms. Moisture behaviour analysis indicates that nanoparticle addition improves resistance to moisture diffusion and environmental degradation, although slight variations in absolute moisture uptake were observed. Overall, the combined use of a 3D-printed PLA core and nanoparticle-modified epoxy matrix provides an effective approach for enhancing the structural performance and durability of sandwich composites.
Zitieren
APA
Hosseini, M., Gaff, M., Hui, D., Konvalinka, P., Li, H., Joshua, J., Rosammal, S. P. K., Shaik, R. S., Ghosh, P., & Hosseini, A. (2026). Evaluation of mechanical properties of sandwich panels with glass fibre face sheets and 3D printed PLA core. REVIEWS ON ADVANCED MATERIALS SCIENCE, 65(1). https://doi.org/10.1515/rams-2025-0258
Vancouver
Hosseini M, Gaff M, Hui D, Konvalinka P, Li H, Joshua J, et al. Evaluation of mechanical properties of sandwich panels with glass fibre face sheets and 3D printed PLA core. REVIEWS ON ADVANCED MATERIALS SCIENCE. 2026;65(1). doi:10.1515/rams-2025-0258
BibTeX
@article{Hosseini2026,
author = {Hosseini, Mahdi and Gaff, Milan and Hui, David and Konvalinka, Petr and Li, Haitao and Joshua, Jensin and Rosammal, Shathrak Prem Kumar and Shaik, Rasheed S. and Ghosh, Pritam and Hosseini, Ahmad},
title = {Evaluation of mechanical properties of sandwich panels with glass fibre face sheets and 3D printed PLA core},
journal = {REVIEWS ON ADVANCED MATERIALS SCIENCE},
year = {2026},
volume = {65},
number = {1},
doi = {10.1515/rams-2025-0258}
}
EUVIMED