EUVIMEDEUVIMED entdecken
Crossref

Comparative study of laser remelting of plasma sprayed coatings on AISI1040 steel with different TiO 2 –Al 2 O 3 and TiO 2 –SiO 2 –Cr 2 O 3 constituents

Fatih Özen, Musa Kılıç, Volkan Onar

Materials Testing · 27.10.2025 · 67 (10) · 1715-1724

DOI: 10.1515/mt-2025-0073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 29.08.2025. Verfasst von Fatih Özen und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, laser remelting was applied using Nd:Yag laser beam to plasma sprayed coatings that include Al 2 O 3 -43 % of TiO 2 for the first experiment series, 2.15 % of TiO 2 , 4.36 % of SiO 2 in Cr 2 O 3 for the second experiment series, and 4.31 % of TiO 2 , 2.15 % of SiO 2 in Cr 2 O 3 for the third experiment series. Wear tests and microstructural analyses were conducted to reveal characterization of the laser remelted specimens. According to the results, the fusion zone exhibited the highest hardest in the microstructure due to quick solidification inducing martensitic transformation in the microstructure. The pearlitic and ferritic structure were transformed into tempered martensite and bainite in heat affected zone, gradually increasing the micro-hardness. While the coefficient of friction in the first series of specimens was measured as 0.23, it was 0.31 for the second and third series of specimens. Although friction coefficient was higher than that of first series, the lowest weight loss was observed in the specimen that laser remelted at 350A plasma spray current level.

Zitieren

APA

Özen, F., Kılıç, M., & Onar, V. (2025). Comparative study of laser remelting of plasma sprayed coatings on AISI1040 steel with different TiO 2 –Al 2 O 3 and TiO 2 –SiO 2 –Cr 2 O 3 constituents. Materials Testing, 67(10), 1715-1724. https://doi.org/10.1515/mt-2025-0073

Vancouver

Özen F, Kılıç M, Onar V. Comparative study of laser remelting of plasma sprayed coatings on AISI1040 steel with different TiO 2 –Al 2 O 3 and TiO 2 –SiO 2 –Cr 2 O 3 constituents. Materials Testing. 2025;67(10):1715-1724. doi:10.1515/mt-2025-0073

BibTeX
@article{zen2025,
  author = {Özen, Fatih and Kılıç, Musa and Onar, Volkan},
  title = {Comparative study of laser remelting of plasma sprayed coatings on AISI1040 steel with different TiO 2 –Al 2 O 3 and TiO 2 –SiO 2 –Cr 2 O 3 constituents},
  journal = {Materials Testing},
  year = {2025},
  volume = {67},
  number = {10},
  pages = {1715--1724},
  doi = {10.1515/mt-2025-0073}
}
Kostenlos starten →