EUVIMEDEUVIMED entdecken
Crossref

Effect of B 2 O 3 /SiO 2 molar ratio and B 2 O 3 content on viscosity and structure of B 2 O 3 –SiO 2 –Al 2 O 3 –Na 2 O–TiO 2 glass lubricant

Lei Cui, Wei Lv, Pei‐yuan Ni, Huailiu Wang, Ying Li

Journal of the American Ceramic Society · 2024-08 · 107 (8) · 5247-5264

DOI: 10.1111/jace.19824 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 08.04.2024. Verfasst von Lei Cui und 4 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, Liaoning Revitalization Talents Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Glass lubricant with a suitable viscosity is essential for producing high‐quality titanium products by the hot extrusion process. In this study, a novel lubricant of B 2 O 3 –SiO 2 –Al 2 O 3 –Na 2 O–TiO 2 (BSANT) glass was proposed, where the effects of B 2 O 3 /SiO 2 molar ratio (B/Si) and B 2 O 3 content on viscosity and structure were investigated. The results showed that the BSANT glass viscosity was gradually decreased, and the viscous activation energy was decreased by 20.24% with an increased B/Si ratio from 0.415 to 0.719. This was attributed to the decreased amounts of Q 3 , [BO 4 ], [AlO 4 ], and bridging oxygen (BO) in the network structure, which in turn resulted in a decreased network degree of polymerization. When B 2 O 3 content was increased from 18.70 to 33.12 mol.%, the melt viscosity value at 950 ℃ was decreased by 64.51%, and the viscous activation energy was reduced by 15.82%. Boron anomalies were also observed in glass melts with the B 2 O 3 content from 28.28 to 33.12 mol.%. The mechanisms responsible for this phenomenon were thoroughly discussed in the study. Additionally, a comparison and discussion of the applications of glass lubricants in metal hot working were presented. A glass lubricant with a specific composition was recommended for use in hot extrusion process within the temperature range of 950–1100°C due to its relatively stable viscosity properties.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • Liaoning Revitalization Talents Program

Zitieren

APA

Cui, L., Lv, W., Ni, P., Wang, H., & Li, Y. (2024). Effect of B 2 O 3 /SiO 2 molar ratio and B 2 O 3 content on viscosity and structure of B 2 O 3 –SiO 2 –Al 2 O 3 –Na 2 O–TiO 2 glass lubricant. Journal of the American Ceramic Society, 107(8), 5247-5264. https://doi.org/10.1111/jace.19824

Vancouver

Cui L, Lv W, Ni P, Wang H, Li Y. Effect of B 2 O 3 /SiO 2 molar ratio and B 2 O 3 content on viscosity and structure of B 2 O 3 –SiO 2 –Al 2 O 3 –Na 2 O–TiO 2 glass lubricant. Journal of the American Ceramic Society. 2024;107(8):5247-5264. doi:10.1111/jace.19824

BibTeX
@article{Cui2024,
  author = {Cui, Lei and Lv, Wei and Ni, Pei‐yuan and Wang, Huailiu and Li, Ying},
  title = {Effect of B 2 O 3 /SiO 2 molar ratio and B 2 O 3 content on viscosity and structure of B 2 O 3 –SiO 2 –Al 2 O 3 –Na 2 O–TiO 2 glass lubricant},
  journal = {Journal of the American Ceramic Society},
  year = {2024},
  volume = {107},
  number = {8},
  pages = {5247--5264},
  doi = {10.1111/jace.19824}
}
Kostenlos starten →