EUVIMEDEUVIMED entdecken
Crossref

Comparison of notch fabrication methods on the impact strength of FDM-3D-printed PLA specimens

Meltem Eryildiz

Materials Testing · 28.03.2023 · 65 (3) · 423-430

DOI: 10.1515/mt-2022-0306 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 08.03.2023. Verfasst von Meltem Eryildiz. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the effect of the notch fabrication method (printing the notch on the part, and machining the notch) on the impact results of 3D-printed polylactic acid (PLA) was investigated. Sensitivity to build orientation was also noted in both test situations. The impact test specimens were printed using an FDM-based printer with or without a notch at various build and print orientations. Un-notched specimens were then machined to create notches. To simulate the impact effects, Ansys software was employed to create a finite element model, and the results of the finite element analysis were consistent with the experimental results. According to the findings, the impact strength of the specimens with 3D-printed notches increased by 11–38% compared to specimens whose notch was machined after the rectangular bars were 3D printed. In addition, it has been observed that the build and print orientations affect the impact strength.

Zitieren

APA

Eryildiz, M. (2023). Comparison of notch fabrication methods on the impact strength of FDM-3D-printed PLA specimens. Materials Testing, 65(3), 423-430. https://doi.org/10.1515/mt-2022-0306

Vancouver

Eryildiz M. Comparison of notch fabrication methods on the impact strength of FDM-3D-printed PLA specimens. Materials Testing. 2023;65(3):423-430. doi:10.1515/mt-2022-0306

BibTeX
@article{Eryildiz2023,
  author = {Eryildiz, Meltem},
  title = {Comparison of notch fabrication methods on the impact strength of FDM-3D-printed PLA specimens},
  journal = {Materials Testing},
  year = {2023},
  volume = {65},
  number = {3},
  pages = {423--430},
  doi = {10.1515/mt-2022-0306}
}
Kostenlos starten →