EUVIMEDEUVIMED entdecken
Crossref

Mechanical and tribological behavior of fiber-reinforced polymer composites with varying fiber orientations and ANN-based COF prediction

Mayank Singh, Abhishek Krishna, Vatsalya Raghuvanshi, Ritendra Yadav, Srihari Dodla, Rakesh Kumar Gautam

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 03.11.2026

DOI: 10.1177/09544062261500534 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 03.11.2026. Verfasst von Mayank Singh und 5 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: Defence Metallurgical Research Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, mechanical and tribological properties of carbon fiber/epoxy (CF/epoxy), glass fiber/epoxy (GF/epoxy) and hybrid carbon-glass fiber/epoxy (CGF/epoxy) composites with two laminate orientations (90/45/90/135/90) and (0/135/0/45/0) are investigated. Different loads (20–50 N) and frequencies (5–11 Hz) were used in tensile, flexural, interlaminar shear, density, microhardness and reciprocating sliding tests. The (90/45/90/135/90) architecture showed the best tensile properties with tensile strength of 637.55 MPa and Young’s modulus of 23.21 GPa for CF/epoxy, while the (0/135/0/45/0) architecture showed the best flexural properties with flexural strength of about 950 MPa for GF/epoxy. The COF and wear of CF/epoxy were lowest, and the wear of GF/epoxy was highest, compared to CF/epoxy, GF/epoxy showed 34.3% higher wear loss, and 16.2% higher specific wear rate for the (90/45/90/135/90) architecture. The (0/135/0/45/0) architecture resulted in the lowest wear loss and specific wear rate for all the composite systems, and CF/epoxy exhibited the best wear resistance. The measured void contents of CF, GF, and CGF composites were 13.27%, 15.47%, and 14.34%, respectively. Damage to the matrix, fiber fragmentation, and wear debris were observed on the worn surfaces using SEM analysis. An ANN model was used to predict COF with R 2 values of 0.91759 and 0.87056 for validation and testing respectively. In general, the results show that the type of reinforcement and laminate architecture have a significant influence on the mechanical, frictional and wear properties of the composite materials studied.

Förderung

  • Defence Metallurgical Research Laboratory

Zitieren

APA

Singh, M., Krishna, A., Raghuvanshi, V., Yadav, R., Dodla, S., & Gautam, R. K. (2026). Mechanical and tribological behavior of fiber-reinforced polymer composites with varying fiber orientations and ANN-based COF prediction. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. https://doi.org/10.1177/09544062261500534

Vancouver

Singh M, Krishna A, Raghuvanshi V, Yadav R, Dodla S, Gautam RK. Mechanical and tribological behavior of fiber-reinforced polymer composites with varying fiber orientations and ANN-based COF prediction. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2026. doi:10.1177/09544062261500534

BibTeX
@article{Singh2026,
  author = {Singh, Mayank and Krishna, Abhishek and Raghuvanshi, Vatsalya and Yadav, Ritendra and Dodla, Srihari and Gautam, Rakesh Kumar},
  title = {Mechanical and tribological behavior of fiber-reinforced polymer composites with varying fiber orientations and ANN-based COF prediction},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2026},
  doi = {10.1177/09544062261500534}
}
Kostenlos starten →