Analysis of mechanical and water absorption properties of hybrid composites reinforced with micron-size bamboo fibers and ceramic particles
International Polymer Processing · 25.03.2024 · 39 (1) · 115-124
DOI: 10.1515/ipp-2023-4374 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Polymer Processing, online erschienen am 20.11.2023. Verfasst von Danish Tahir und 2 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pakistan Science Foundation, GIK Institute’s Graduate Assistantship Scheme.
Abstract (Originalsprache)
Bamboo and its hybrid composites were made using the hand lay-up method to evaluate the change in mechanical and physical properties that occurred through filler addition. Density measurements and tensile test results showed an increment in values when a certain percentage of silicon carbide (SiC) was added. As the SiC percentage grows from 0 to 6 %, the density of the hybrid composite increases from 1.15 to 1.36 gm/cc whereas tensile strength increases from 37 MPa to 42 MPa when 4 wt% SiC is added in 20 wt% of the bamboo composite. The scanning electron microscopy (SEM) analysis of tensile fractured samples further supported the improvement in tensile characteristics. To examine the impact and hardness characteristics, composites were subjected to the Charpy impact test and hardness test. 4 wt% of SiC addition in 20 wt% of the bamboo composite decreased the impact strength from 28.79 to 27.43 (×10 −3 kJ/m 2 ) and increased the hardness from 44 to 55 Hv. The composites’ water absorption behavior demonstrated that the addition of filler lifts the composite’s resistance to absorbing water, preserving the composites’ dimensional firmness and mechanical qualities.
Förderung
- Pakistan Science Foundation
- GIK Institute’s Graduate Assistantship Scheme
Zitieren
APA
Tahir, D., Karim, M. R. A., & Hu, H. (2024). Analysis of mechanical and water absorption properties of hybrid composites reinforced with micron-size bamboo fibers and ceramic particles. International Polymer Processing, 39(1), 115-124. https://doi.org/10.1515/ipp-2023-4374
Vancouver
Tahir D, Karim MRA, Hu H. Analysis of mechanical and water absorption properties of hybrid composites reinforced with micron-size bamboo fibers and ceramic particles. International Polymer Processing. 2024;39(1):115-124. doi:10.1515/ipp-2023-4374
BibTeX
@article{Tahir2024,
author = {Tahir, Danish and Karim, Muhammad Ramzan Abdul and Hu, Hong},
title = {Analysis of mechanical and water absorption properties of hybrid composites reinforced with micron-size bamboo fibers and ceramic particles},
journal = {International Polymer Processing},
year = {2024},
volume = {39},
number = {1},
pages = {115--124},
doi = {10.1515/ipp-2023-4374}
}
EUVIMED