The influence of parameters on the response and the optimisation of metal-ceramic composite coatings by HVOF spraying
High Temperature Materials and Processes · 23.01.2026 · 45 (1)
DOI: 10.1515/htmp-2025-0124 ↗Kurz gefasst
Fachartikel in der Zeitschrift High Temperature Materials and Processes, online erschienen am 07.07.2026. Verfasst von Yingjiao Chen und 1 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper proposes an advanced optimal algorithm for solving multi-response problems in experiment of tungsten carbide/cobalt (WC-Co) coatings in high-velocity oxygen fuel (HVOF) spraying process. This method is integrated with the desirability function of the response surface methodology based on experiments designed by Taguchi. A total of 18 sets of eight control factors were executed based on the L18 array experiment. A series of responses of the wear-resistant coatings were evaluated, including hardness, spray thickness and wear rate, using desirability-based functions. The microstructure of the HVOF sprayed coating becomes denser and less porous, with no cracks. Additionally, the surface where the substrate and the coating are bonded appears to be extremely flat while firmly adhering to form a mechanical adhesion and, to a lesser extent, a metallurgical interface. Also, micro-wear on the tracks shown in the wear test showed the presence of micro-cracks and discontinuous plastic deformations, with no obvious grooves or micro-crack features. An increase in hardness by 16.61 %, an improvement in coating thickness by 10.50 % and a reduction in wear rate by 25.30 % was demonstrated by the experimental results. It was clear that confirmation tests were greatly improved by the multi-responses based on desirability in HVOF sprayed WC-Co experiments. The multi-response properties of these coatings are optimised for use in HVOF spraying to produce potentially wear-resistant coatings. The proposed procedure was applied to HVOF-sprayed WC-Co experiments, where the results demonstrated its feasibility and effectiveness in maximising hardness, achieving the desired deposited thickness and minimising wear rate using an HVOF thermal spray.
Zitieren
APA
Chen, Y., & Jean, M. (2026). The influence of parameters on the response and the optimisation of metal-ceramic composite coatings by HVOF spraying. High Temperature Materials and Processes, 45(1). https://doi.org/10.1515/htmp-2025-0124
Vancouver
Chen Y, Jean M. The influence of parameters on the response and the optimisation of metal-ceramic composite coatings by HVOF spraying. High Temperature Materials and Processes. 2026;45(1). doi:10.1515/htmp-2025-0124
BibTeX
@article{Chen2026,
author = {Chen, Yingjiao and Jean, Mingder},
title = {The influence of parameters on the response and the optimisation of metal-ceramic composite coatings by HVOF spraying},
journal = {High Temperature Materials and Processes},
year = {2026},
volume = {45},
number = {1},
doi = {10.1515/htmp-2025-0124}
}
EUVIMED