EUVIMEDEUVIMED entdecken
Crossref

Investigation of recycling effects on the mechanical properties of short carbon and glass fiber reinforced polyetherimide composites

Jin‐Ming Hu, Zhi‐Mao Zhou, Fang‐Liang Guo, Zheng Sun, Li Zhang, Zi‐Ming Wang, Peng‐Gang Yin, Yuan‐Qing Li, Shao‐Yun Fu

Journal of Applied Polymer Science · 05.06.2023 · 140 (21)

DOI: 10.1002/app.53871 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 14.03.2023. Verfasst von Jin‐Ming Hu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hebei Province, Natural Science Foundation Project of Chongqing, Chongqing Science and Technology Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Considering the increasing composite waste accumulation, this work explores the feasibility of replacing virginal carbon fibers (VCFs) and virginal glass fibers (VGFs) with recycled fibers for injection molded polyetherimide (PEI) composites. Extensive characterizations were conducted to reveal effects of sulfuric acid recycling process on mechanical properties of fibers and their composites. It was shown that strength retention rates of recycled carbon fibers (RCFs) and recycled glass fibers (RGFs) were 81.6% and 55.7%. The reinforcing factor of RCFs increased from 0.120 of VCFs to 0.147 due to the enhanced interfacial bonding while the reinforcing factor of RGFs decreased from 0.080 of VGFs to 0.065 owing to the glass fiber strength reduction. As a result, the composite tensile strength (152.8 MPa) of RCF/PEI was comparable to that (155.3 MPa) of VCF/ PEI and RGF/PEI tensile strength (102.5 MPa) was lower than that (112.3 MPa) of VGF/PEI. Moreover, the tensile modulus of RCF/PEI and RGF/PEI were also approximatively comparable to those of VCF/PEI and VGF/PEI since recycling process showed a slight effect on fiber modulus. Although there exists an impact of recycling on fiber mechanical properties, the introduction of recycled fibers (especially RCFs) by injection molding process can promisingly enhance PEI composites.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hebei Province
  • Natural Science Foundation Project of Chongqing, Chongqing Science and Technology Commission

Zitieren

APA

Hu, J., Zhou, Z., Guo, F., Sun, Z., Zhang, L., Wang, Z., Yin, P., Li, Y., & Fu, S. (2023). Investigation of recycling effects on the mechanical properties of short carbon and glass fiber reinforced polyetherimide composites. Journal of Applied Polymer Science, 140(21). https://doi.org/10.1002/app.53871

Vancouver

Hu J, Zhou Z, Guo F, Sun Z, Zhang L, Wang Z, et al. Investigation of recycling effects on the mechanical properties of short carbon and glass fiber reinforced polyetherimide composites. Journal of Applied Polymer Science. 2023;140(21). doi:10.1002/app.53871

BibTeX
@article{Hu2023,
  author = {Hu, Jin‐Ming and Zhou, Zhi‐Mao and Guo, Fang‐Liang and Sun, Zheng and Zhang, Li and Wang, Zi‐Ming and Yin, Peng‐Gang and Li, Yuan‐Qing and Fu, Shao‐Yun},
  title = {Investigation of recycling effects on the mechanical properties of short carbon and glass fiber reinforced polyetherimide composites},
  journal = {Journal of Applied Polymer Science},
  year = {2023},
  volume = {140},
  number = {21},
  doi = {10.1002/app.53871}
}
Kostenlos starten →