EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Nonlinear radiative heat transference in a T-shaped porous fin saturated with GO–MoS 2 /H 2 O hybrid nanofluid: effects of temperature-dependent thermal conductivity and humidity-ratio linearization

Gurram Dharmaiah, Seepana Praveenkumar, Kallur V. Nagaraja, Bamdeb Dey, Paban Dhar

Chemical Product and Process Modeling · 2026-11-23

DOI: 10.1515/cppm-2026-0264 ↗

At a glance

Journal article in Chemical Product and Process Modeling, published online on 2026-11-23. Written by Gurram Dharmaiah and 4 co-authors. 45 references. The full text is freely available (open access, CC BY 4.0).

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

In this work, a computational and machine-learning-based thermal investigation of a one-dimensional, fully wetted T-shaped porous fin operating under steady-state conditions is performed. The pores are saturated with a Graphene Oxide–Molybdenum Disulfide/Water (GO–MoS 2 /H 2 O) hybrid nanofluid that seeps through the matrix according to Darcy’s law, while a liquid film on the lateral surfaces evaporates into the ambient humid air. The energy equations of the stem and the flange include temperature-dependent matrix conductivity, convective–evaporative transfer through the Chilton–Colburn analogy with a linearised humidity-ratio closure, and untruncated fourth-power surface radiation expressed through the temperature-difference ratio θ r = T b − T a T a ${\theta }_{r}=\frac{\left({T}_{b}-{T}_{a}\right)}{{T}_{a}}$ . The coupled boundary value problem is solved with MATLAB bvp4c and verified against published limiting-case results with maximum deviation 2.08 %, against an independent quadrature solution obtained from the exact first integral deviations below 2 × 10 −8 , and through junction heat-rate and global energy-closure checks. Within the same solver, Taylor linearisation of the radiation term overestimates the junction temperature by up to 12 % and the fin efficiency by up to 20 % for θ r ≤ 0.4. The fin efficiency is defined as the ratio of consistently defined actual and ideal heat rates, and a maximum-principle argument shows that it lies between zero and unity. Variance-based sensitivity analysis of the exact model identifies the stem thickness-to-length ratio with total index 0.59 and the flange-to-stem length ratio value 0.22 as the dominant controls of the efficiency. An 8-10-6-1 Levenberg–Marquardt neural network surrogate trained on 200 Latin-hypercube samples reaches a coefficient of determination of 0.991 ± 0.010 on an independent 1,000-point test set over 10 repeated data splits, and it is reliable only inside its training domain.

Cite

APA

Dharmaiah, G., Praveenkumar, S., Nagaraja, K. V., Dey, B., & Dhar, P. (2026). Nonlinear radiative heat transference in a T-shaped porous fin saturated with GO–MoS 2 /H 2 O hybrid nanofluid: effects of temperature-dependent thermal conductivity and humidity-ratio linearization. Chemical Product and Process Modeling. https://doi.org/10.1515/cppm-2026-0264

Vancouver

Dharmaiah G, Praveenkumar S, Nagaraja KV, Dey B, Dhar P. Nonlinear radiative heat transference in a T-shaped porous fin saturated with GO–MoS 2 /H 2 O hybrid nanofluid: effects of temperature-dependent thermal conductivity and humidity-ratio linearization. Chemical Product and Process Modeling. 2026. doi:10.1515/cppm-2026-0264

BibTeX
@article{Dharmaiah2026,
  author = {Dharmaiah, Gurram and Praveenkumar, Seepana and Nagaraja, Kallur V. and Dey, Bamdeb and Dhar, Paban},
  title = {Nonlinear radiative heat transference in a T-shaped porous fin saturated with GO–MoS 2 /H 2 O hybrid nanofluid: effects of temperature-dependent thermal conductivity and humidity-ratio linearization},
  journal = {Chemical Product and Process Modeling},
  year = {2026},
  doi = {10.1515/cppm-2026-0264}
}
Start for free →