EUVIMEDTutustu EUVIMEDiin
Open access · CC BY 4.0

Keller-Box analysis of MHD heat and mass transfer in Cu-water nanofluid flow over a nonlinear stretching sheet with multiple slips effects and Dufour diffusion

Mannam Hymavathi, Yanala Dharmendar Reddy

Chemical Product and Process Modeling · 2026-11-18

DOI: 10.1515/cppm-2026-0152 ↗

At a glance

Journal article in Chemical Product and Process Modeling, published online on 2026-11-18. Written by Mannam Hymavathi and 1 co-authors. 66 references. The full text is freely available (open access, CC BY 4.0).

TiivistelmäBibliografiset tiedotCiteRelated studies

Abstract (original language)

This study examines steady two-dimensional magnetohydrodynamic (MHD) heat and mass transfer flow of a Cu–water nanofluid over a nonlinear stretching surface embedded in a porous medium, with thermal radiation, viscous dissipation, heat generation/absorption, a first-order destructive chemical reaction, Dufour diffusion, wall suction and velocity, thermal and concentration slips. The governing non-linear partial differential equations (PDEs) for momentum, energy, and concentration are transformed into a system of ordinary differential equations (ODEs) using similarity transformation. The resulting governing equations are numerically solved using the Keller Box Method (KBM), which is esteemed for its resilience and second-order accuracy in boundary-layer analysis. This investigation examines the influence of dimensionless parameters, such as the magnetic parameter ( M ), radiation parameter ( R ), Lewis number (Le), chemical reaction parameter ( γ ), Suction ( S ), Dufour effect (Du) and velocity, thermal, concentration slips on the velocity, temperature, and concentration profiles. Results indicate that a rise in the magnetic parameter diminishes the velocity field due to Lorentz force effects, Radiation effects the thermal profile, whereas a destructive reaction generally reduces concentration gradient and changes the wall concentration gradient. The key physical outcome is that the Dufour cross-diffusion competes directly with wall cooling, the Nusselt number decreases with the Dufour number, by 33.7 % when Du increases from 0.1 to 0.2, and the wall heat flux reverses sign (the fluid heats the sheet) once Du exceeds 0.40. Suction is the most effective control of heat and mass transfer, increasing S from 0.5 to 1 raises the Nusselt and Sherwood numbers by 65.6 % and 34.4 %. Stronger nonlinear stretching ( n ) from 0.5 to 3 increases C f , Nu x and Sh x by 54.9 %, 120.6 % and 71.8 %, while the magnetic field M from 0.5 to 2 increases C f by 26.3 % and reduces Nu x by 11.1 %. Raising the Cu volume fraction φ from 0.05 to 0.1 increases skin friction by 18.5 % but lowers Nu x by 1.7 %, because the higher nanofluid density thins the momentum layer and weakens convective cooling, which outweighs the conductivity gain. Velocity slip ( λ u ) reduces skin friction by 22.8 %, and thermal slip ( λ T ) reduces Nu x by 27.6 %. These results provide quantitative guidance for polymer extrusion, coating and porous thermal-processing systems.

Cite

APA

Hymavathi, M., & Reddy, Y. D. (2026). Keller-Box analysis of MHD heat and mass transfer in Cu-water nanofluid flow over a nonlinear stretching sheet with multiple slips effects and Dufour diffusion. Chemical Product and Process Modeling. https://doi.org/10.1515/cppm-2026-0152

Vancouver

Hymavathi M, Reddy YD. Keller-Box analysis of MHD heat and mass transfer in Cu-water nanofluid flow over a nonlinear stretching sheet with multiple slips effects and Dufour diffusion. Chemical Product and Process Modeling. 2026. doi:10.1515/cppm-2026-0152

BibTeX
@article{Hymavathi2026,
  author = {Hymavathi, Mannam and Reddy, Yanala Dharmendar},
  title = {Keller-Box analysis of MHD heat and mass transfer in Cu-water nanofluid flow over a nonlinear stretching sheet with multiple slips effects and Dufour diffusion},
  journal = {Chemical Product and Process Modeling},
  year = {2026},
  doi = {10.1515/cppm-2026-0152}
}
Start for free →