Process modelling and optimization of the removal of biophile metals from Nigerian bitumen driven by phosphonium-based ionic liquid
Chemical Product and Process Modeling · 2026-11-23
DOI: 10.1515/cppm-2026-0103 ↗At a glance
Journal article in Chemical Product and Process Modeling, published online on 2026-11-23. Written by Adefunke B. Borokinni and 2 co-authors. 50 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
This study explored the process modelling and optimisation of the removal of biophile metals from Nigerian bitumen using a hydrophobic phosphonium-based ionic liquid. Bitumen extraction from oil sands was performed using a Soxhlet extractor with toluene as the solvent. Metal removal was achieved through biphasic solvent extraction employing trihexyltetradecylphosphonium chloride as the extractant, chosen for its high thermal stability, low volatility, and strong affinity for metal ions. Metal concentrations of Cu, Mn, Zn, Co, Fe, and Cr were quantified via Atomic Absorption Spectrophotometry (Model Alpha Star 4). The optimisation process utilised Response Surface Methodology (RSM), with model validation through diagnostic plots generated by Design Expert Stat-Ease software. ANOVA results (p
Cite
APA
Borokinni, A. B., Adebiyi, F. M., & Ore, O. T. (2026). Process modelling and optimization of the removal of biophile metals from Nigerian bitumen driven by phosphonium-based ionic liquid. Chemical Product and Process Modeling. https://doi.org/10.1515/cppm-2026-0103
Vancouver
Borokinni AB, Adebiyi FM, Ore OT. Process modelling and optimization of the removal of biophile metals from Nigerian bitumen driven by phosphonium-based ionic liquid. Chemical Product and Process Modeling. 2026. doi:10.1515/cppm-2026-0103
BibTeX
@article{Borokinni2026,
author = {Borokinni, Adefunke B. and Adebiyi, Festus M. and Ore, Odunayo T.},
title = {Process modelling and optimization of the removal of biophile metals from Nigerian bitumen driven by phosphonium-based ionic liquid},
journal = {Chemical Product and Process Modeling},
year = {2026},
doi = {10.1515/cppm-2026-0103}
}
EUVIMED