EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Exergy, economic, and environmental optimization of a geothermal-based multigeneration system for power, cooling, and hydrogen production

Ying Chen

Chemical Product and Process Modeling · 2026-06-12

DOI: 10.1515/cppm-2026-0061 ↗

At a glance

Journal article in Chemical Product and Process Modeling, published online on 2026-06-12. Written by Ying Chen. 36 references. The full text is freely available (open access, CC BY 4.0).

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

The increased use of renewable energy (RE) to meet energy demand is recognized as a suitable solution to environmental issues. The current study examines the potential of a geothermal heat source for a multi-generation setup. The setup consists of a geothermal power plant with a customized transcritical CO 2 cycle for power and cooling generation, and a water electrolyzer for hydrogen generation subsystems. The system analysis was conducted from thermodynamic, economic, and exergoenvironmental outlooks. The outcomes show that power generation has the greatest impact on exergy efficiency, while the exergoenvironmental impact of products is mainly determined by cooling capacity. Also, the exergy efficiency, despite an increased product cost rate, is independent of the inlet geofluid’s rates. The estimated optimum net power, cooling capacity, and hydrogen generation rates are approximately 991.40 kW, 71.77 kW, and 2.51 kg/h, respectively. The cost and exergoenvironmental impact rates of these products are 9.90 $/h and 82.77 mPts/h, which offered an exergy efficiency of 34.90 %.

Cite

APA

Chen, Y. (2026). Exergy, economic, and environmental optimization of a geothermal-based multigeneration system for power, cooling, and hydrogen production. Chemical Product and Process Modeling. https://doi.org/10.1515/cppm-2026-0061

Vancouver

Chen Y. Exergy, economic, and environmental optimization of a geothermal-based multigeneration system for power, cooling, and hydrogen production. Chemical Product and Process Modeling. 2026. doi:10.1515/cppm-2026-0061

BibTeX
@article{Chen2026,
  author = {Chen, Ying},
  title = {Exergy, economic, and environmental optimization of a geothermal-based multigeneration system for power, cooling, and hydrogen production},
  journal = {Chemical Product and Process Modeling},
  year = {2026},
  doi = {10.1515/cppm-2026-0061}
}
Start for free →