EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 3.0

Research on the Impact of Amplitude of Vibrations on Electrical Parameters of Vibroarc Weld Overlay in Argon

Mitko Ivanov Nikolov

Acta Technologica Agriculturae · 2015

DOI: 10.1515/ata-2015-0010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Technologica Agriculturae, 2015. Verfasst von Mitko Ivanov Nikolov. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The research is taken on the vibroarc welding apparatus ENTON-60 equipped with an axial non-inertial vibrator in argon shield. The criteria used for assessing the flow of the electric arc process and the formation of weld overlay clad surfaces are: short circuit voltage, voltage at the start of arc combustion, short circuit amperage, and amperage at the end of arc combustion. Wire electrode‘s vibrating frequency is considered as an input variable of the cybernetic model. It has been found that amplitude of vibrations has a significant impact on the vibroarc process - voltage parameters and welding current ratio, as the minimum amperage of short circuit and the lowest voltage at the start of arc combustion is realized at 2 mm amplitude of vibrations.

Zitieren

APA

Nikolov, M. I. (2015). Research on the Impact of Amplitude of Vibrations on Electrical Parameters of Vibroarc Weld Overlay in Argon. Acta Technologica Agriculturae. https://doi.org/10.1515/ata-2015-0010

Vancouver

Nikolov MI. Research on the Impact of Amplitude of Vibrations on Electrical Parameters of Vibroarc Weld Overlay in Argon. Acta Technologica Agriculturae. 2015. doi:10.1515/ata-2015-0010

BibTeX
@article{Nikolov2015,
  author = {Nikolov, Mitko Ivanov},
  title = {Research on the Impact of Amplitude of Vibrations on Electrical Parameters of Vibroarc Weld Overlay in Argon},
  journal = {Acta Technologica Agriculturae},
  year = {2015},
  doi = {10.1515/ata-2015-0010}
}
Kostenlos starten →