Effect of Milling Parameters on Amplitude Spectrum of Vibrations during Milling Materials Based on Wood
Applied Sciences · 18.04.2023 · 13 (8) · 5061
DOI: 10.3390/app13085061 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.04.2023. Verfasst von Áron Hortobágyi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FMA analysis of potential signals suitable for adaptive control of nesting strategies for milling wood-based agglomerates, Research of non-contact method of analysis of small and dust particles arising in the production process with a prediction of negative effects of dust particles.
Abstract (Originalsprache)
Milling with use of CNC machines is a well-established method and much research was concluded on this topic. However, when it comes to wood and wood composites, the material non-homogeneity brings a lot of variability into cutting conditions. As a part of research into potential signals for nesting milling, material vibrations at clamping points were examined in this study. The main goal was to conclude if cutting parameters have a statistically significant effect on measurement. The place of measurement was analyzed so it was accessible to the machine operator. Medium density fiberboard and particleboard specimens were cut through by razor and spiral mill, with spindle rotating 10,000 and 20,000 min−1 and feed rates 2, 6, 10 m·min−1. Vibrations were measured at vacuum grippers, and were then processed by fast Fourier transform. Then, frequency spectrum maxima were compared, as well as amplitude sizes. Main frequencies were of roughly 166 Hz and multiples, suggesting their origin in tool rotation. When maxima were compared, tool use, spindle rotation, and feed rate seemed to affect the result. Frequency spectrum amplitudes were subjected to analysis of variance, significant effect was found on spindle speed, tool, and specimen material. No significant effect was found with differing feed rates.
Förderung
- FMA analysis of potential signals suitable for adaptive control of nesting strategies for milling wood-based agglomerates
- Research of non-contact method of analysis of small and dust particles arising in the production process with a prediction of negative effects of dust particles
Zitieren
APA
Hortobágyi, Á., Koleda, P., Koleda, P., & Kminiak, R. (2023). Effect of Milling Parameters on Amplitude Spectrum of Vibrations during Milling Materials Based on Wood. Applied Sciences, 13(8), 5061. https://doi.org/10.3390/app13085061
Vancouver
Hortobágyi Á, Koleda P, Koleda P, Kminiak R. Effect of Milling Parameters on Amplitude Spectrum of Vibrations during Milling Materials Based on Wood. Applied Sciences. 2023;13(8):5061. doi:10.3390/app13085061
BibTeX
@article{Hortobgyi2023,
author = {Hortobágyi, Áron and Koleda, Peter and Koleda, Pavol and Kminiak, Richard},
title = {Effect of Milling Parameters on Amplitude Spectrum of Vibrations during Milling Materials Based on Wood},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {8},
pages = {5061},
doi = {10.3390/app13085061}
}
EUVIMED