EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 3.0

XPS Analysis of AISI 304L Stainless Steel Surface after Electropolishing

K. Rokosz, T. Hryniewicz, F. Simon, S. Rzadkiewicz

Advances in Materials Science · 2015

DOI: 10.1515/adms-2015-0004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Materials Science, 2015. Verfasst von K. Rokosz und 3 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the paper, the passive surface layers of AISI 304L after standard (EP50) and very-high-current density electropolishing (EP1000) in a mixture of orthophosphoric and sulfuric acids in a 1:4 ratio, are presented. The main finding of the presented studies is enrichment of the steel surface film in chromium: total chromium to total iron ratio was equal to 6.6 after EP50 and to 2.8 after EP1000; on the other hand, chromium compounds to iron compounds ratio was equal to 10.1 after EP50, and 3.9 after EP1000.

Zitieren

APA

Rokosz, K., Hryniewicz, T., Simon, F., & Rzadkiewicz, S. (2015). XPS Analysis of AISI 304L Stainless Steel Surface after Electropolishing. Advances in Materials Science. https://doi.org/10.1515/adms-2015-0004

Vancouver

Rokosz K, Hryniewicz T, Simon F, Rzadkiewicz S. XPS Analysis of AISI 304L Stainless Steel Surface after Electropolishing. Advances in Materials Science. 2015. doi:10.1515/adms-2015-0004

BibTeX
@article{Rokosz2015,
  author = {Rokosz, K. and Hryniewicz, T. and Simon, F. and Rzadkiewicz, S.},
  title = {XPS Analysis of AISI 304L Stainless Steel Surface after Electropolishing},
  journal = {Advances in Materials Science},
  year = {2015},
  doi = {10.1515/adms-2015-0004}
}
Kostenlos starten →