EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 3.0

Design Of Hollow Section Overlap Joints With Reinforcing Rib Plate. Joint Resistance

J. Bródka

Archives of Civil Engineering · 2015

DOI: 10.1515/ace-2015-0001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Civil Engineering, 2015. Verfasst von J. Bródka. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

These joints are used when the designer and contractor anticipate difficulties during the construction of overlap joints. They were not included in the PN EN 1993-1-8 in full scale. Resistance assessment of such joints is presented in accordance with standard rules. The results were compared with the experimental studies carried out at the “Mostostal” Centre; while the former research activities and the legitimacy of the proposed method of assessing the resistance of these joints was confirmed. This is an example of an overlap joint calculation.

Zitieren

APA

Bródka, J. (2015). Design Of Hollow Section Overlap Joints With Reinforcing Rib Plate. Joint Resistance. Archives of Civil Engineering. https://doi.org/10.1515/ace-2015-0001

Vancouver

Bródka J. Design Of Hollow Section Overlap Joints With Reinforcing Rib Plate. Joint Resistance. Archives of Civil Engineering. 2015. doi:10.1515/ace-2015-0001

BibTeX
@article{Brdka2015,
  author = {Bródka, J.},
  title = {Design Of Hollow Section Overlap Joints With Reinforcing Rib Plate. Joint Resistance},
  journal = {Archives of Civil Engineering},
  year = {2015},
  doi = {10.1515/ace-2015-0001}
}
Kostenlos starten →