EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Fatigue Strength of Hollow Section Joints through Optimized Weld Design of Gusset Plates

André Dürr, Sascha Knefelkamp, Matthias Winkler, Stefan Herion, Philipp Ladendorf

ce/papers · 2026-09 · 9 (2-3) · 2791-2796

DOI: 10.1002/cepa.70796 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von André Dürr und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As investigated in the preceding project FOSTA P1442 the fatigue resistance of welded hollow section joints can be increased remarkably by using shape‐optimized gusset plates. It showed that the fatigue strength can be significantly increased by choosing the right plate geometry. It also was shown that the weld seam geometry, the weld preparation and the weld execution have a significant impact on fatigue strength. In the new research project FOSTA P1735 this approach is addressed. The project aims to increase the fatigue strength of hollow section joints through optimized weld‐shapes and to close the current gap in previously missing design and manufacturing recommendations. In a first step, basic research on small scale specimens were carried out for steel grades S355 and S700. The findings will be implemented to full‐scale X‐ and K‐joints. In this paper the current results of the experimental investigations on small scale specimens and full scale X‐joints as well as the accompanying FEM studies are presented.

Zitieren

APA

Dürr, A., Knefelkamp, S., Winkler, M., Herion, S., & Ladendorf, P. (2026). Improving Fatigue Strength of Hollow Section Joints through Optimized Weld Design of Gusset Plates. ce/papers, 9(2-3), 2791-2796. https://doi.org/10.1002/cepa.70796

Vancouver

Dürr A, Knefelkamp S, Winkler M, Herion S, Ladendorf P. Improving Fatigue Strength of Hollow Section Joints through Optimized Weld Design of Gusset Plates. ce/papers. 2026;9(2-3):2791-2796. doi:10.1002/cepa.70796

BibTeX
@article{Drr2026,
  author = {Dürr, André and Knefelkamp, Sascha and Winkler, Matthias and Herion, Stefan and Ladendorf, Philipp},
  title = {Improving Fatigue Strength of Hollow Section Joints through Optimized Weld Design of Gusset Plates},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2791--2796},
  doi = {10.1002/cepa.70796}
}
Kostenlos starten →