EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrodeposition of crack-free and amorphous Ni-Mo alloys with high Mo content from gluconate baths

Arthur Filgueira de Almeida, Josiane Dantas Costa, Mikarla Baía de Sousa, Joyce Ingrid Venceslau de Souto, Renato Alexandre Costa de Santana, Aureliano Xavier dos Santos, José Anderson Machado Oliveira, José Jailson Nicácio Alves, Ana Regina Nascimento Campos

Scientia Plena · 09.11.2023 · 19 (10)

DOI: 10.14808/sci.plena.2023.104201 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientia Plena, online erschienen am 09.11.2023. Verfasst von Arthur Filgueira de Almeida und 8 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this article, electroplated Ni-Mo alloys with high Mo content from gluconate baths are presented. Specifically, the influence of current density on the electrodeposition process, which produced crack-free Ni-Mo alloys with high Mo content, was evaluated. Commonly, Ni-Mo electrodeposition is performed in citrate solutions, as citrate ions promote coordination compounds with greater stability compared to mono and bivalent ligands. However, due to the high internal stress caused by Mo in the coating when its content is very high, microcracks are formed along the surface, causing defects in the deposit. Gluconate baths have been proven to produce crack-free alloys, even when current density is high. The deposits were evaluated for chemical composition by Energy-Dispersive X-ray Specrometry (EDS) and surface morphology by electron microscopy using a Scanning Electron Microscope (SEM). Furthermore, the deposition process was evaluated for current efficiency, and a reaction mechanism was proposed based on observations acquired by other authors. The highest Mo content obtained was 43% by weight. The highest current efficiency was 26%, obtained at 30 mA/cm².

Zitieren

APA

Almeida, A. F. D., Costa, J. D., Sousa, M. B. D., Souto, J. I. V. D., Santana, R. A. C. D., Santos, A. X. D., Oliveira, J. A. M., Alves, J. J. N., & Campos, A. R. N. (2023). Electrodeposition of crack-free and amorphous Ni-Mo alloys with high Mo content from gluconate baths. Scientia Plena, 19(10). https://doi.org/10.14808/sci.plena.2023.104201

Vancouver

Almeida AFD, Costa JD, Sousa MBD, Souto JIVD, Santana RACD, Santos AXD, et al. Electrodeposition of crack-free and amorphous Ni-Mo alloys with high Mo content from gluconate baths. Scientia Plena. 2023;19(10). doi:10.14808/sci.plena.2023.104201

BibTeX
@article{Almeida2023,
  author = {Almeida, Arthur Filgueira de and Costa, Josiane Dantas and Sousa, Mikarla Baía de and Souto, Joyce Ingrid Venceslau de and Santana, Renato Alexandre Costa de and Santos, Aureliano Xavier dos and Oliveira, José Anderson Machado and Alves, José Jailson Nicácio and Campos, Ana Regina Nascimento},
  title = {Electrodeposition of crack-free and amorphous Ni-Mo alloys with high Mo content from gluconate baths},
  journal = {Scientia Plena},
  year = {2023},
  volume = {19},
  number = {10},
  doi = {10.14808/sci.plena.2023.104201}
}
Kostenlos starten →