EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrodeposition of Crack-Free Rhenium by High-Throughput Pulse and Pulse Reverse Optimization

Michael McBride, Nathan Brown, Iris Denmark, Amanda Rutledge, Courtney Clark, Jordyn N. Janusz, Daniel E. Hooks

Journal of The Electrochemical Society · 01.11.2025 · 172 (11) · 112506

DOI: 10.1149/1945-7111/ae1b3f ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 18.11.2025. Verfasst von Michael McBride und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrodeposition of metallic rhenium (Re) is optimized for crack-free coatings through the use of a high-throughput cell to develop pulse-reverse waveforms. Pulse waveforms were required for metallic rhenium electrodeposition from water in salt electrolytes. Screening experiments were used to understand how flow rate and the inclusion of citric acid impact the film formation process using a consistent pulse sequence. Flow rate has minimal influence on the observed electrodeposition process, indicating that reaction pathways are more important than diffusion depletion in the chosen electrolyte. The addition of citric acid additionally enabled deposition of metallic Re over the hydrogen evolution reaction. Drawing parallels to crack-free chromium (Cr) plating, it was postulated that a tailored pulse sequence would provide additional improvements in the electrodeposition process. A 3-factor circumscribed central composite design was utilized to investigate the impact of pulse on time, off time, and peak current control the formation of cracks during electrodeposition. Application of a minimum charge is required to form a metallic Re film, independent of the pulse sequence, consistent with an intermediate conversion process during deposition. Finally, application of a pulse reverse sequence produced a crack-free, metallic Re coating.

Zitieren

APA

McBride, M., Brown, N., Denmark, I., Rutledge, A., Clark, C., Janusz, J. N., & Hooks, D. E. (2025). Electrodeposition of Crack-Free Rhenium by High-Throughput Pulse and Pulse Reverse Optimization. Journal of The Electrochemical Society, 172(11), 112506. https://doi.org/10.1149/1945-7111/ae1b3f

Vancouver

McBride M, Brown N, Denmark I, Rutledge A, Clark C, Janusz JN, et al. Electrodeposition of Crack-Free Rhenium by High-Throughput Pulse and Pulse Reverse Optimization. Journal of The Electrochemical Society. 2025;172(11):112506. doi:10.1149/1945-7111/ae1b3f

BibTeX
@article{McBride2025,
  author = {McBride, Michael and Brown, Nathan and Denmark, Iris and Rutledge, Amanda and Clark, Courtney and Janusz, Jordyn N. and Hooks, Daniel E.},
  title = {Electrodeposition of Crack-Free Rhenium by High-Throughput Pulse and Pulse Reverse Optimization},
  journal = {Journal of The Electrochemical Society},
  year = {2025},
  volume = {172},
  number = {11},
  pages = {112506},
  doi = {10.1149/1945-7111/ae1b3f}
}
Kostenlos starten →