EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effectiveness of a 3D Printed Training Kit for the Preparation of Access Cavities in Calcified Teeth: A Pilot Study

Vranine Kadrija, Hauke Hildebrand, Wadim Leontiev, Eva Magni, Florian Markus Thieringer, Roland Weiger, Thomas Connert

European Endodontic Journal · 2025

DOI: 10.14744/eej.2024.42275 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Endodontic Journal, 2025. Verfasst von Vranine Kadrija und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Periodontology, Endodontology and Cariology, University Center for Dental Medicine Basel UZB, University of Basel, Basel, Switzerland. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Education, Dental, Endodontics, Dental Pulp Calcification. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

This study aimed to evaluate the effectiveness of a 3D printed training kit for the preparation of endodontic access cavities in calcified teeth.

Methods

The root canal system of a micro-CT scanned premolar was digitally processed to create an endodontic training kit containing 10 teeth with ten different progressive degrees of pulp canal calcification. A tooth variant with a medium calcification degree (5/10) was printed in three copies using opaque resin. Additionally, a set of 10 transparent training teeth with red-colored pulp was produced using PolyJet 3D printing technology, which was used to train the access cavity preparation in a controlled manner due to the transparency of the teeth. Undergraduate students (n=27) and dentists (n=10) each prepared a total of 13 (one pre-training, two post-training) access cavities. Substance loss was quantified by CBCT, and user satisfaction was evaluated by questionnaire. Paired t-tests were used to compare the means for substance loss and procedure time for pre- and post-training conditions. Unpaired t-tests were used to compare differences between students and dentists. The level of significance was set at α=0.05.

Results

Mean substance loss before and after training decreased for both students (71.4 versus 54.68 mm3; p=0.069) and dentists (67.3 versus 51.1 mm3; p=0.633), but the difference was not statistically significant. The average preparation time decreased with training for students (420 versus 275 seconds; p=0.100) and dentists (336 versus 158 seconds; p=0.054), but not significantly. Root perforation rates also decreased (students: 6/27 versus 4/27; dentists: 1/10 versus 0/10). Participants rated the training model as very realistic and useful, despite the difference in material texture.

Conclusion

The proposed 3D printed training kit appears to be a suitable tool for undergraduate dental students, which could expand their opportunities to practice the preparation of endodontic access cavities in calcified teeth. (EEJ-2024-06-091)

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalEducation, DentalEndodonticsDental Pulp CalcificationRoot Canal PreparationHumansPilot ProjectsStudents, DentalMaleX-Ray MicrotomographyFemaleDentistsAdult

Autor:innen und Institutionen

  • Department of Periodontology, Endodontology and Cariology, University Center for Dental Medicine Basel UZB, University of Basel, Basel, Switzerland.
  • Oral and Cranio-Maxillo-Facial Surgery and 3D Print Lab, University Hospital Basel, Basel, Switzerland; Department of Biomedical Engineering, Medical Additive Manufacturing Research Group (Swiss MAM), University of Base…

Zitieren

APA

Kadrija, V., Hildebrand, H., Leontiev, W., Magni, E., Thieringer, F. M., Weiger, R., & Connert, T. (2025). Effectiveness of a 3D Printed Training Kit for the Preparation of Access Cavities in Calcified Teeth: A Pilot Study. European Endodontic Journal. https://doi.org/10.14744/eej.2024.42275

Vancouver

Kadrija V, Hildebrand H, Leontiev W, Magni E, Thieringer FM, Weiger R, et al. Effectiveness of a 3D Printed Training Kit for the Preparation of Access Cavities in Calcified Teeth: A Pilot Study. European Endodontic Journal. 2025. doi:10.14744/eej.2024.42275

BibTeX
@article{Kadrija2025,
  author = {Kadrija, Vranine and Hildebrand, Hauke and Leontiev, Wadim and Magni, Eva and Thieringer, Florian Markus and Weiger, Roland and Connert, Thomas},
  title = {Effectiveness of a 3D Printed Training Kit for the Preparation of Access Cavities in Calcified Teeth: A Pilot Study},
  journal = {European Endodontic Journal},
  year = {2025},
  doi = {10.14744/eej.2024.42275}
}
Kostenlos starten →