Energy-efficient design and control of a galvanic section under small-batch production conditions
Vestnik of Samara State Technical University. Technical Sciences Series · 28.04.2026 · 34 (1) · 142-163
DOI: 10.14498/tech.2026.1.8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Vestnik of Samara State Technical University. Technical Sciences Series, online erschienen am 28.04.2026. Verfasst von Mikhail Yu. Livshits und 1 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Ways to reduce the energy intensity of the galvanic section of an industrial enterprise in the machine-building industry with small-scale production by reducing energy consumption for heating and thermal stabilization of the electrolyte are proposed. The influence of the electrolyte temperature on the main quality indicators of the applied metal coating: thickness and uniformity is revealed. Analysis of the effect of electrolyte temperature on the density of the cathode and anode current, the deposition rate of the electroplating, the magnitude of the electrical potentials of the cathode, anode and electrolyte, as well as the scattering capacity allowed us to determine the permissible temperature range of the electrolyte, ensuring the required coating quality technology. The thermal balance of galvanic baths has been compiled when the bath is switched to the mode of heating the electrolyte to the process temperature and stabilizing the temperature regime in conditions of uneven loading of equipment during small-scale production. Based on the energy balance of the galvanic process, critical values of the bath loading coefficients have been established, at which it is advisable to replace the centralized steam heat supply with a decentralized one from a gas steam generator or an individual electric heater. A scheme for connecting baths to heat sources is proposed, taking into account the specifics of equipment loading in small-scale production with the possibility of recycling excess heat generated from decentralized heat sources into the heating and hot water supply network. An energy-efficient method for controlling the heat supply of galvanic baths in small-scale production has been chosen. The economic effect of the proposed organization of heat supply to the galvanic site and control of the electrolyte temperature of galvanic baths in small-scale production is determined.
Zitieren
APA
Livshits, M. Y., & Romanova, A. S. (2026). Energy-efficient design and control of a galvanic section under small-batch production conditions. Vestnik of Samara State Technical University. Technical Sciences Series, 34(1), 142-163. https://doi.org/10.14498/tech.2026.1.8
Vancouver
Livshits MY, Romanova AS. Energy-efficient design and control of a galvanic section under small-batch production conditions. Vestnik of Samara State Technical University. Technical Sciences Series. 2026;34(1):142-163. doi:10.14498/tech.2026.1.8
BibTeX
@article{Livshits2026,
author = {Livshits, Mikhail Yu. and Romanova, Alena S.},
title = {Energy-efficient design and control of a galvanic section under small-batch production conditions},
journal = {Vestnik of Samara State Technical University. Technical Sciences Series},
year = {2026},
volume = {34},
number = {1},
pages = {142--163},
doi = {10.14498/tech.2026.1.8}
}
EUVIMED