EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Hybrid Modelling and Simulation Framework for Energy-Efficient Operation of Heated Crude Oil Pipelines Under Small-Batch and Multi-Condition Operation

Yi Guo, Chun Li, Yang Lv, Liuxiao Li, Yangfan Lu, Kai Wen

Modelling · 12.06.2026 · 7 (3) · 115

DOI: 10.3390/modelling7030115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Modelling, online erschienen am 12.06.2026. Verfasst von Yi Guo und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Oil and Gas Control Center of National Petroleum and Natural Gas Pipeline Network Group Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heated crude oil pipelines transporting high-pour-point, high-viscosity, and high-wax-content crude oil are increasingly operated under small-batch and multi-condition scenarios. Under such conditions, fixed-parameter models and experience-based operating strategies may fail to accurately describe the evolving thermo-hydraulic state, resulting in inaccurate temperature-safety assessment and conservative energy use. To address this problem, this study develops a hybrid modelling and simulation framework for the energy-efficient operation of heated crude oil pipelines. The framework integrates operating-state perception, online parameter inversion, transient thermo-hydraulic simulation, data assimilation, and rolling optimization. First, an online parameter inversion method based on inverse problem solving is established to dynamically identify the overall heat-transfer coefficient and friction correction factor from Supervisory Control and Data Acquisition (SCADA) measurements. Second, a transient thermo-hydraulic simulation and data-assimilation model is constructed to predict pressure, temperature, and safety margins under changing boundary conditions. Third, a constraint-aware rolling optimization strategy is introduced to coordinate heating and pumping operations while satisfying temperature and pressure constraints. The proposed framework is validated using a practical crude oil pipeline. Under a representative low-flow-rate condition, online parameter inversion corrects the overestimation of the thermo-hydraulic state by the fixed-parameter model: the total temperature drop along the pipeline is revised from 33.12 °C to 35.65 °C, and the minimum station-inlet oil temperature is revised from 24.77 °C to 21.61 °C. After optimization is introduced, the total operating energy consumption decreases from 11,715.65 kW to 11,287.43 kW, corresponding to a reduction of 3.66%, while all temperature and pressure constraints remain satisfied. Under time-varying boundary conditions, the rolling optimization strategy further adjusts heating-furnace operation according to variations in inlet flow rate, inlet oil temperature, and ambient temperature, thereby reducing cumulative heating energy consumption while maintaining safe operation. The results demonstrate that the proposed framework provides an implementable modelling and simulation approach for online state assessment, transient prediction, and energy-efficient operation of heated crude oil pipelines under variable operating conditions.

Förderung

  • Oil and Gas Control Center of National Petroleum and Natural Gas Pipeline Network Group Co., Ltd.

Zitieren

APA

Guo, Y., Li, C., Lv, Y., Li, L., Lu, Y., & Wen, K. (2026). A Hybrid Modelling and Simulation Framework for Energy-Efficient Operation of Heated Crude Oil Pipelines Under Small-Batch and Multi-Condition Operation. Modelling, 7(3), 115. https://doi.org/10.3390/modelling7030115

Vancouver

Guo Y, Li C, Lv Y, Li L, Lu Y, Wen K. A Hybrid Modelling and Simulation Framework for Energy-Efficient Operation of Heated Crude Oil Pipelines Under Small-Batch and Multi-Condition Operation. Modelling. 2026;7(3):115. doi:10.3390/modelling7030115

BibTeX
@article{Guo2026,
  author = {Guo, Yi and Li, Chun and Lv, Yang and Li, Liuxiao and Lu, Yangfan and Wen, Kai},
  title = {A Hybrid Modelling and Simulation Framework for Energy-Efficient Operation of Heated Crude Oil Pipelines Under Small-Batch and Multi-Condition Operation},
  journal = {Modelling},
  year = {2026},
  volume = {7},
  number = {3},
  pages = {115},
  doi = {10.3390/modelling7030115}
}
Kostenlos starten →