An Automatic Calibration Method for Installation Angles of Unmanned Aerial Vehicle Lidar Systems
Photogrammetric Engineering & Remote Sensing · 2026
DOI: 10.14358/pers.26-00079r3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photogrammetric Engineering & Remote Sensing, 2026. Verfasst von Zijie Li und 1 weiteren Autor:innen.
Abstract (Originalsprache)
The measurement accuracy of unmanned aerial vehicle (UAV) light detection and ranging (lidar) systems highly depends on the accuracy of installation parameters between the laser scanner and the position and orientation system. Traditional methods rely on artificial targets and are inefficient. This paper proposes a largely automatic calibration method using building roofs as natural calibration fields. The technical workflow includes the following steps. First, the cloth simulation filter is used to separate nonground point clouds. Then, the region-growing algorithm is adopted to robustly segment individual roof planes. Subsequently, an improved robust symmetric iterated closest point algorithm is applied to achieve high-precision registration of roofs between strips. The geometric centers of the registered roofs are used as homologous tie points. Finally, a least-squares optimization model is constructed to calculate the optimal parameters. Experimental results based on data collected from three lidar systems—FT800, FT1500, and MT1500—demonstrate that the proposed method exhibits promising generalizability across different scanning mechanisms. Taking the FT1500 system data at a flight altitude of 200 m as an example, the misalignment errors at gable roof peaks (0.059 m in pitch, 0.062 m in roll) are superior to those achieved by traditional manual methods (0.092 m in pitch, 0.120 m in roll). The absolute accuracy of the point clouds reaches the subdecimeter level (d3D = 0.079 m), while the relative strip alignment consistency improves from 0.351 to 0.098 m in the horizontal component and from 0.219 to 0.059 m in the vertical component. The proposed method effectively reduces layering and ghosting between flight strips while improving both absolute and relative point cloud accuracy, providing an efficient solution for largely automatic calibration of UAV lidar systems
Zitieren
APA
Li, Z., & Hu, Q. (2026). An Automatic Calibration Method for Installation Angles of Unmanned Aerial Vehicle Lidar Systems. Photogrammetric Engineering & Remote Sensing. https://doi.org/10.14358/pers.26-00079r3
Vancouver
Li Z, Hu Q. An Automatic Calibration Method for Installation Angles of Unmanned Aerial Vehicle Lidar Systems. Photogrammetric Engineering & Remote Sensing. 2026. doi:10.14358/pers.26-00079r3
BibTeX
@article{Li2026,
author = {Li, Zijie and Hu, Qingwu},
title = {An Automatic Calibration Method for Installation Angles of Unmanned Aerial Vehicle Lidar Systems},
journal = {Photogrammetric Engineering & Remote Sensing},
year = {2026},
doi = {10.14358/pers.26-00079r3}
}
EUVIMED