EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

LiDAR-Based Unmanned Aerial Vehicle Offshore Wind Blade Inspection and Modeling

Alexandre Oliveira, André Dias, Tiago Santos, Paulo Rodrigues, Alfredo Martins, José Almeida

Drones · 28.10.2024 · 8 (11) · 617

DOI: 10.3390/drones8110617 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Drones, online erschienen am 28.10.2024. Verfasst von Alexandre Oliveira und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 112 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Project H2020 EU-SCORES—European Scalable Complementary Offshore Renewable Energy Sources, Portuguese funding agency, FCT—Fundação para a Ciência e a Tecnologia, FCT.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The deployment of offshore wind turbines (WTs) has emerged as a pivotal strategy in the transition to renewable energy, offering significant potential for clean electricity generation. However, these structures’ operation and maintenance (O&M) present unique challenges due to their remote locations and harsh marine environments. For these reasons, it is fundamental to promote the development of autonomous solutions to monitor the health condition of the construction parts, preventing structural damage and accidents. This paper explores the application of Unmanned Aerial Vehicles (UAVs) in the inspection and maintenance of offshore wind turbines, introducing a new strategy for autonomous wind turbine inspection and a simulation environment for testing and training autonomous inspection techniques under a more realistic offshore scenario. Instead of relying on visual information to detect the WT parts during the inspection, this method proposes a three-dimensional (3D) light detection and ranging (LiDAR) method that estimates the wind turbine pose (position, orientation, and blade configuration) and autonomously controls the UAV for a close inspection maneuver. The first tests were carried out mainly in a simulation framework, combining different WT poses, including different orientations, blade positions, and wind turbine movements, and finally, a mixed reality test, where a real vehicle performed a full inspection of a virtual wind turbine.

Förderung

  • European Project H2020 EU-SCORES—European Scalable Complementary Offshore Renewable Energy Sources
  • Portuguese funding agency, FCT—Fundação para a Ciência e a Tecnologia
  • FCT

Zitieren

APA

Oliveira, A., Dias, A., Santos, T., Rodrigues, P., Martins, A., & Almeida, J. (2024). LiDAR-Based Unmanned Aerial Vehicle Offshore Wind Blade Inspection and Modeling. Drones, 8(11), 617. https://doi.org/10.3390/drones8110617

Vancouver

Oliveira A, Dias A, Santos T, Rodrigues P, Martins A, Almeida J. LiDAR-Based Unmanned Aerial Vehicle Offshore Wind Blade Inspection and Modeling. Drones. 2024;8(11):617. doi:10.3390/drones8110617

BibTeX
@article{Oliveira2024,
  author = {Oliveira, Alexandre and Dias, André and Santos, Tiago and Rodrigues, Paulo and Martins, Alfredo and Almeida, José},
  title = {LiDAR-Based Unmanned Aerial Vehicle Offshore Wind Blade Inspection and Modeling},
  journal = {Drones},
  year = {2024},
  volume = {8},
  number = {11},
  pages = {617},
  doi = {10.3390/drones8110617}
}
Kostenlos starten →