Additive manufacturing of bamboo-weave baskets based on PLA-WF filament
Polimery · 20.03.2026 · 71 (3) · 181-186
DOI: 10.14314/polimery.2026.3.4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polimery, online erschienen am 20.03.2026. Verfasst von Chen Wang und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Bamboo-weave baskets were manufactured using fused deposition modeling (FDM) from a hybrid PLA-WF filament (84.4% PLA; 15.6% poplar wood fiber). Process parameters affecting the surface quality of 3D printed products were optimized: (i) extrusion temperature, (ii) extrusion speed, and (iii) retraction distance. Both the arithmetic mean roughness (Ra) and the mean maximum roughness height (Rz) of PLA-WF printed products decreased with increasing extrusion temperature, decreasing extrusion speed, and increasing retraction distance. The best surface quality and dimensional accuracy were obtained using an extrusion temperature of 230°C, an extrusion speed of 40 mm/s, and a retraction distance of 6 mm.
Zitieren
APA
Wang, C., & Huang, H. (2026). Additive manufacturing of bamboo-weave baskets based on PLA-WF filament. Polimery, 71(3), 181-186. https://doi.org/10.14314/polimery.2026.3.4
Vancouver
Wang C, Huang H. Additive manufacturing of bamboo-weave baskets based on PLA-WF filament. Polimery. 2026;71(3):181-186. doi:10.14314/polimery.2026.3.4
BibTeX
@article{Wang2026,
author = {Wang, Chen and Huang, Hanyi},
title = {Additive manufacturing of bamboo-weave baskets based on PLA-WF filament},
journal = {Polimery},
year = {2026},
volume = {71},
number = {3},
pages = {181--186},
doi = {10.14314/polimery.2026.3.4}
}
EUVIMED