Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications
Polymers · 15.01.2024 · 16 (2) · 245
DOI: 10.3390/polym16020245 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.01.2024. Verfasst von Gabriela Barreto und 4 weiteren Autor:innen. Beteiligte Einrichtung: CCComposites Laboratory, Engineering School, Universidad de Antioquia (UdeA), Calle 70 No. 52-21, Medellin 050010, Colombia. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Additive manufacturing has garnered significant attention as a versatile method for fabricating green and complex composite materials. This study delves into the fabrication of polymer composites by employing polylactic acid (PLA) in conjunction with rice husk as a reinforcing filler. The filaments were made by an extruded filament maker and then were used to make tensile and impact samples by another extrusion technology, fused deposition modeling (FDM). The structural and morphological characteristics of the composite materials were analyzed using scanning electron microscopy SEM. Results show that both the filament and samples are very reliable in producing polymer parts with this rice husk solid waste. This research contributes to increasing materials’ circularity and potentially creating a local social economy around rice production, where this waste is not much used.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CCComposites Laboratory, Engineering School, Universidad de Antioquia (UdeA), Calle 70 No. 52-21, Medellin 050010, Colombia.
- Advanced Materials Laboratory, LAMAV, UENF-State University of Northern Rio de Janeiro, Av. Alberto Lamego, 2000, Campos dos Goytacazes 28013-602, RJ, Brazil.
- Military Institute of Engineering, IME, Praça General Tibúrcio 80, Urca, Rio de Janeiro 22290-270, RJ, Brazil.
ORCID-Profile: Gabriela Barreto, Sergio Neves Monteiro, Henry A Colorado
Zitieren
APA
Barreto, G., Restrepo, S., Vieira, C. M., Monteiro, S. N., & Colorado, H. A. (2024). Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications. Polymers, 16(2), 245. https://doi.org/10.3390/polym16020245
Vancouver
Barreto G, Restrepo S, Vieira CM, Monteiro SN, Colorado HA. Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications. Polymers. 2024;16(2):245. doi:10.3390/polym16020245
BibTeX
@article{Barreto2024,
author = {Barreto, Gabriela and Restrepo, Santiago and Vieira, Carlos Mauricio and Monteiro, Sergio Neves and Colorado, Henry A},
title = {Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications},
journal = {Polymers},
year = {2024},
volume = {16},
number = {2},
pages = {245},
doi = {10.3390/polym16020245}
}
EUVIMED