EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of nozzle diameter and fiber volume fraction on tensile properties of FDM-printed CCF/PLA composites

Tao Zhao iD, Xin Dong, Hengfa Wu, Yang Gao, Ting Lei, Fei Zheng

PLOS One · 19.08.2026 · 21 (8) · e0356177

DOI: 10.1371/journal.pone.0356177 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 19.08.2026. Verfasst von Tao Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Ningxia Engineering Research Center for Hybrid Manufacturing System, College of Mechatronic Engineering, North Minzu University, Yinchuan, China. Hauptthemen laut MEDLINE: Tensile Strength, Polyesters, Carbon Fiber, Printing, Three-Dimensional. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningxia Natural Science Foundation, Fundamental Research Funds for the Central Universities of North Minzu University, Ningxia Leading Talents in Science and Technology Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of nozzle diameter and continuous carbon fiber (CCF) volume fraction on the tensile properties and failure mechanisms of fused deposition modeling (FDM) printed CCF/polylactic acid (PLA) composites. Two nozzle sizes (1.0 mm and 0.8 mm) and four CCF volume fractions (0%, 20%, 30%, 50%) were adopted to prepare six groups of specimens for uniaxial tensile tests and field emission scanning electron microscopy (FE-SEM) characterization. The results indicate that CCF-reinforced specimens exhibit nearly no plastic deformation and fail mainly by fiber fracture, while neat PLA shows obvious plastic deformation and tensile fracture. For the 1.0 mm nozzle, the tensile strengths reach 36.4 MPa, 34.8 MPa and 19.8 MPa at CCF volume fractions of 50%, 30% and 20%, respectively. The tensile strength is 16.9 MPa for specimens with 50% CCF printed using the 0.8 mm nozzle. Larger nozzle diameter effectively improves tensile strength, which increases approximately linearly with rising CCF content. Microscopic observations reveal that the 1.0 mm nozzle ensures uniform fiber distribution and strong fiber-matrix interfacial bonding. Considering mechanical performance and cost, 30% is determined as the optimal CCF volume fraction. With the merits of light weight, high strength and environmental friendliness, the composites are suitable for aerospace lightweight parts, automotive components, civil engineering load-bearing structures, customized tooling and medical devices.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tensile StrengthPolyestersCarbon FiberPrinting, Three-DimensionalMaterials TestingMicroscopy, Electron, Scanning

Substanzen

Polyesterspoly(lactide)Carbon Fiber

Autor:innen und Institutionen

  • Ningxia Engineering Research Center for Hybrid Manufacturing System, College of Mechatronic Engineering, North Minzu University, Yinchuan, China.
  • School of Electrical and Information Engineering, North Minzu University, Yinchuan, China.
  • Basic Experimental Teaching and Engineering Training Center, North Minzu University, Yinchuan, China.

ORCID-Profile: Tao Zhao

Förderung

  • Ningxia Natural Science Foundation
  • Fundamental Research Funds for the Central Universities of North Minzu University
  • Ningxia Leading Talents in Science and Technology Program

Zitieren

APA

Zhao, T., Dong, X., Wu, H., Gao, Y., Lei, T., & Zheng, F. (2026). Effects of nozzle diameter and fiber volume fraction on tensile properties of FDM-printed CCF/PLA composites. PLOS One, 21(8), e0356177. https://doi.org/10.1371/journal.pone.0356177

Vancouver

Zhao T, Dong X, Wu H, Gao Y, Lei T, Zheng F. Effects of nozzle diameter and fiber volume fraction on tensile properties of FDM-printed CCF/PLA composites. PLOS One. 2026;21(8):e0356177. doi:10.1371/journal.pone.0356177

BibTeX
@article{Zhao2026,
  author = {Zhao, Tao and Dong, Xin and Wu, Hengfa and Gao, Yang and Lei, Ting and Zheng, Fei},
  title = {Effects of nozzle diameter and fiber volume fraction on tensile properties of FDM-printed CCF/PLA composites},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {8},
  pages = {e0356177},
  doi = {10.1371/journal.pone.0356177}
}
Kostenlos starten →