EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A multi-field coupled model for gas migration in high-temperature coal seams considering fracture zones and fracture roughness

Shantengyue Jiang iD, Mo Zhang

PLOS One · 2026

DOI: 10.1371/journal.pone.0349721 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Shantengyue Jiang und 1 weiteren Autor:innen. Beteiligte Einrichtung: College of Mining, Liaoning Technical University, Fuxin, China. Hauptthemen laut MEDLINE: Coal, Hot Temperature, Gases, Models, Theoretical. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gas migration in high-temperature coal seams is governed by fracture-zone connectivity, fracture-surface roughness, and thermo-mechanical deformation. However, fracture roughness is often treated qualitatively or absorbed into empirical permeability, which limits its use in field-scale gas-hazard assessment. This study develops a thermo-hydro-mechanical coupled model for gas-bearing coal seams with fracture zones. A dimensionless roughness parameter is introduced to quantify the relative asperity height of fracture surfaces and link fracture morphology with equivalent permeability, gas desorption, heat transfer, and coal-rock deformation. The model was validated using thermal-response data from the 16035 working face in the Liupanshui mining area and gas-production data from a coalbed methane well. It was then applied to analyze gas migration and coal-rock response in the 16035 working face. Results show that connected fracture zones act as preferential pathways for gas and heat transfer and control the spatial distributions of pressure, temperature, stress, and displacement near the roadway. Increasing the initial coal-seam temperature from 40°C to 50°C increases the maximum displacement by 15.8% and the maximum gas pressure by 4.3%. A lower roughness index also enhances gas transport. When the roughness index decreases from 0.4 to 0.1, the maximum permeability increases by 6.18%, and the gas desorption intensity at 3000s increases by 75.7%. These findings indicate that gas hazard in high-temperature coal seams should be evaluated by jointly considering fracture-zone geometry, quantifiable fracture roughness, and thermo-mechanical coupling effects.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CoalHot TemperatureGasesModels, TheoreticalCoal MiningSurface Properties

Substanzen

CoalGases

Autor:innen und Institutionen

  • College of Mining, Liaoning Technical University, Fuxin, China.

ORCID-Profile: Shantengyue Jiang

Zitieren

APA

Jiang, S., & Zhang, M. (2026). A multi-field coupled model for gas migration in high-temperature coal seams considering fracture zones and fracture roughness. PLOS One. https://doi.org/10.1371/journal.pone.0349721

Vancouver

Jiang S, Zhang M. A multi-field coupled model for gas migration in high-temperature coal seams considering fracture zones and fracture roughness. PLOS One. 2026. doi:10.1371/journal.pone.0349721

BibTeX
@article{Jiang2026,
  author = {Jiang, Shantengyue and Zhang, Mo},
  title = {A multi-field coupled model for gas migration in high-temperature coal seams considering fracture zones and fracture roughness},
  journal = {PLOS One},
  year = {2026},
  doi = {10.1371/journal.pone.0349721}
}
Kostenlos starten →