Experimental and numerical studies on heat exchange between slag/metal particles and air inside countercurrent cyclone heat exchanger for recovering waste heat from molten slags in dry and centrifugal granulation process
PLOS One · 23.07.2026 · 21 (7) · e0349252
DOI: 10.1371/journal.pone.0349252 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 23.07.2026. Verfasst von Shali Lv und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan, China. Hauptthemen laut MEDLINE: Hot Temperature, Metals, Industrial Waste. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Education Department of Liaoning Province, China.
Abstract (Originalsprache)
In dry and centrifugal granulation of molten slags with heat recovery, the heat exchange efficiency between high-temperature particles and the cold air directly determines the efficiency of waste heat recovery. However, the heat transfer characteristics between pure slag particles granulated from blast furnace slag and air and between a mixture of slag and metal particles granulated from steelmaking slag and air in complex flow fields still remain unclear. Therefore, this study employs a combined approach of experiment and numerical simulation to comparatively investigate the heat transfer behavior of pure slag particles and mixtures of slag and metal particles in a countercurrent cyclone heat exchanger. The investigation results indicate that the heat exchanger exhibits optimal heat transfer performance under specific operating conditions, with the maximum heat exchange efficiencies being 80.0% for pure slag particles and 77.0% for a mixture of slag/metal particles produced from steelmaking slag. Both experimental and numerical simulation results indicate that metallic iron particles produced from granulation of steelmaking slag lowers the heat exchange efficiency; when the metallic iron content in the slag increases from 2.5% to 10% by weight, the heat exchange efficiency drops from 77.0% to 73.0%. The numerical simulation results further reveal that the spatial distribution of particles within the heat exchanger is a key factor determining the overall heat exchange efficiency. The results provide a theoretical basis for design and operation optimization of industrial countercurrent cyclone heat exchangers for waste heat recovery from molten slags in dry and centrifugal granulation process.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan, China.
- Hot Rolled Strip Steel Mill, Ansteel Co. Ltd., Anshan, China.
- School of Electronic and Information Engineering, University of Science and Technology Liaoning, Anshan, China.
ORCID-Profile: Ming Zhao
Förderung
- Education Department of Liaoning Province, China
Zitieren
APA
Lv, S., Pan, Y., Li, Y., Zhao, M., Jing, Y. A., Cai, C., Zhong, J., Wang, J., & Guo, H. (2026). Experimental and numerical studies on heat exchange between slag/metal particles and air inside countercurrent cyclone heat exchanger for recovering waste heat from molten slags in dry and centrifugal granulation process. PLOS One, 21(7), e0349252. https://doi.org/10.1371/journal.pone.0349252
Vancouver
Lv S, Pan Y, Li Y, Zhao M, Jing YA, Cai C, et al. Experimental and numerical studies on heat exchange between slag/metal particles and air inside countercurrent cyclone heat exchanger for recovering waste heat from molten slags in dry and centrifugal granulation process. PLOS One. 2026;21(7):e0349252. doi:10.1371/journal.pone.0349252
BibTeX
@article{Lv2026,
author = {Lv, Shali and Pan, Yuhua and Li, Yansong and Zhao, Ming and Jing, Yu-An and Cai, Changyou and Zhong, Jiaqi and Wang, Jun and Guo, Haixin},
title = {Experimental and numerical studies on heat exchange between slag/metal particles and air inside countercurrent cyclone heat exchanger for recovering waste heat from molten slags in dry and centrifugal granulation process},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {7},
pages = {e0349252},
doi = {10.1371/journal.pone.0349252}
}
EUVIMED